|
|
#define BLINKER_WIFI
#define BLINKER_MIOT_MULTI_OUTLET //设置为小爱多个插座的模式
#include <Blinker.h>
BlinkerButton Button1("btn-km"); //设置blinkerapp内数据键名
BlinkerButton Button2("btn-kckm"); //这里只用了其中三个
BlinkerButton Button3("btn-gckm");
BlinkerText Text1("text_1");
char i;
char auth[] = "04cb960";
char ssid[] = "ChinaNet-9rWs";
char pswd[] = "dajvzqb";
bool oState[3] = { false }; //设置5路开关控制
void miotPowerState(const String & state, uint8_t num) //小爱同学控制指令
{
BLINKER_LOG("need set outlet: ", num, ", power state: ", state);
if(num==1){
i=D1; //指定每一路开关对应在开发板上的通道接口
}else if(num==2){
i=D2;
}else if(num==3){
i=D5;
}
if (state == BLINKER_CMD_ON) {
digitalWrite(i,1);
BlinkerMIOT.powerState("on", num);
BlinkerMIOT.print();
oState[num] = true;
}
else if (state == BLINKER_CMD_OFF) {
digitalWrite(i,0);
BlinkerMIOT.powerState("off", num);
BlinkerMIOT.print();
oState[num] = false;
if (num == 0)
{
for (uint8_t o_num = 0; o_num < 5; o_num++)
{
oState[o_num] = false;
}
}
}
}
void miotQuery(int32_t queryCode) //小爱同学控制
{
BLINKER_LOG("MIOT Query codes: ", queryCode);
switch (queryCode)
{
case BLINKER_CMD_QUERY_ALL_NUMBER :
BLINKER_LOG("MIOT Query All");
BlinkerMIOT.powerState(oState ? "on" : "off");
BlinkerMIOT.print();
break;
case BLINKER_CMD_QUERY_POWERSTATE_NUMBER :
BLINKER_LOG("MIOT Query Power State");
BlinkerMIOT.powerState(oState ? "on" : "off");
BlinkerMIOT.print();
break;
default :
BlinkerMIOT.powerState(oState ? "on" : "off");
BlinkerMIOT.print();
break;
}
}
void dataRead(const String & data)
{
BLINKER_LOG("Blinker readString: ", data);
Blinker.vibrate();
uint32_t BlinkerTime = millis();
Blinker.print("millis", BlinkerTime);
}
void button1_callback(const String & state) //点灯app内控制按键触发
{
static bool bOpen = false;
bOpen =!bOpen;
if(bOpen) {digitalWrite(D0, HIGH);
Blinker.print("开门命令已经处理");}
else digitalWrite(D0, LOW);
BLINKER_LOG("get button state: ", state);
Text1.print("shuju");
}
void button2_callback(const String & state) //点灯app内控制按键触发
{
static bool bOpen = false;
bOpen =!bOpen;
if(bOpen) {digitalWrite(D2, HIGH);
Blinker.print("开门命令已经处理");}
else digitalWrite(D2, LOW);
BLINKER_LOG("get button state: ", state);
Text1.print("shuju");
}
void button3_callback(const String & state) //点灯app内控制按键触发
{
static bool bOpen = false;
bOpen =!bOpen;
if(bOpen) {digitalWrite(D5, HIGH);
Blinker.print("开门命令已经处理");}
else digitalWrite(D5, LOW);
BLINKER_LOG("get button state: ", state);
Text1.print("shuju");
}
void setup()
{
Serial.begin(115200);
BLINKER_DEBUG.stream(Serial);
pinMode(D0, OUTPUT);
digitalWrite(D0, LOW);
pinMode(D2, OUTPUT);
digitalWrite(D2, LOW);
pinMode(D5, OUTPUT);
digitalWrite(D5, LOW);
Blinker.begin(auth, ssid, pswd);
Blinker.attachData(dataRead);
BlinkerMIOT.attachPowerState(miotPowerState);
BlinkerMIOT.attachQuery(miotQuery);
Button1.attach(button1_callback);
Button2.attach(button2_callback);
Button3.attach(button3_callback);
}
void loop()
{
Blinker.run();
}
#define BLINKER_WIFI
#define BLINKER_MIOT_SENSOR //小爱同学定义为传感器设备
#include <Blinker.h>
#include <DHT.h>
char auth[] = "**********"; //设备key
char ssid[] = "**********"; //wifi ssid
char pswd[] = "**********"; //wifi 密码
BlinkerNumber HUMI("humi"); //定义湿度数据键名
BlinkerNumber TEMP("temp"); //定义温度数据键名
#define DHTPIN 2 //定义DHT11模块连接管脚io2
#define DHTTYPE DHT11 // 使用DHT 11温度湿度模块
//#define DHTTYPE DHT22 // DHT 22 (AM2302), AM2321
//#define DHTTYPE DHT21 // DHT 21 (AM2301)
DHT dht(DHTPIN, DHTTYPE); //定义dht
float humi_read = 0, temp_read = 0;
void heartbeat()
{
HUMI.print(humi_read); //给blinkerapp回传湿度数据
TEMP.print(temp_read); //给blinkerapp回传温度数据
}
void miotQuery(int32_t queryCode) //小爱同学语音命令反馈
{
BLINKER_LOG("MIOT Query codes: ", queryCode);
int humi_read_int=humi_read; //去掉湿度浮点
BlinkerMIOT.humi(humi_read_int); //小爱接收湿度
BlinkerMIOT.temp(temp_read); //小爱接收温度
BlinkerMIOT.print();
}
void setup()
{
Serial.begin(115200);
BLINKER_DEBUG.stream(Serial);
BLINKER_DEBUG.debugAll();
Blinker.begin(auth, ssid, pswd);
Blinker.attachHeartbeat(heartbeat);
dht.begin();
BlinkerMIOT.attachQuery(miotQuery);
}
void loop()
{
Blinker.run();
float h = dht.readHumidity();
float t = dht.readTemperature();
if (isnan(h) || isnan(t))
{
BLINKER_LOG("Failed to read from DHT sensor!");
}
else
{
BLINKER_LOG("Humidity: ", h, " %");
BLINKER_LOG("Temperature: ", t, " *C");
humi_read = h;
temp_read = t;
}
Blinker.delay(2000);
}
这两个代码怎么合在一起可用 一个开关灯 一个温度湿度传感器
|
|
发表于 2020-3-21 14:48
发表于 2020-3-22 12:26