论坛上学习小爱控制ESP8266烧写故障请大神解答

Small_Atom

按照论坛给的代码:
#define BLINKER_WIFI
#define BLINKER_MIOT_LIGHT//支持小爱同学
#include <Blinker.h>
char auth[] = "62dbb4019a9b";//app中获取到的Secret Key(密钥)
char ssid[] = "Atom_Home_24G";
char pswd[] = "atom@qq.com";
int GPIO = 0; //定义继电器输入引脚为GPIO/0
// 新建组件对象
BlinkerButton Button1("btn-abc");//注意：要和APP组件’数据键名’一致
// 按下BlinkerAPP按键即会执行该函数
void button1_callback(const String & state) {
BLINKER_LOG("get button state: ", state);
digitalWrite(GPIO, !digitalRead(GPIO));
Blinker.vibrate();
}
//小爱电源类操作的回调函数:
//当小爱同学向设备发起控制, 设备端需要有对应控制处理函数
void miotPowerState(const String & state)
{
BLINKER_LOG("need set power state: ", state);
(state == BLINKER_CMD_OFF) {
digitalWrite(GPIO, LOW);
BlinkerMIOT.powerState("off");
BlinkerMIOT.print();
}
else if (state == BLINKER_CMD_ON) {
digitalWrite(GPIO, HIGH);
BlinkerMIOT.powerState("on");
BlinkerMIOT.print();
}
}
void setup() {
// 初始化串口，并开启调试信息，调试用可以删除
Serial.begin(115200);
BLINKER_DEBUG.stream(Serial);
// 初始化IO
pinMode(GPIO, OUTPUT);
digitalWrite(GPIO, HIGH);
// 初始化blinker
Blinker.begin(auth, ssid, pswd);
Button1.attach(button1_callback);
//小爱同学务必在回调函数中反馈该控制状态
BlinkerMIOT.attachPowerState(miotPowerState);//注册回调函数
}
void loop() {
Blinker.run();
}
void setup() {
  // put your setup code here, to run once:
}
void loop() {
  // put your main code here, to run repeatedly:





请大神帮忙看看是哪里问题，谢谢

Creeper666

图片打不开，不了解详细情况

liu854208255

void setup() {
  // put your setup code here, to run once:
}
void loop() {
  // put your main code here, to run repeatedly:
把最后这个删掉

(state == BLINKER_CMD_OFF) 小爱控制这句前面要加if