esp32 arduino 连接上wifi后报错 GET... failed, error: send header failed

ibadcool

[2748] WiFi Connected.
[2748] IP Address:
[2749] 172.20.10.2
[5270] [HTTP] GET... failed, error: send header failed

有哪位大大知道啥问题不?换了WIFI也不行,不像是我这网络问题.

奈何col

我测试了最新的blinker lib和esp32 package 1.0.2，正常，建议更换1.0.2使用。
1.0.3变更较多，等我们适配了1.0.3再更新

奈何col

用的啥例程

ibadcool

奈何col 发表于 2019-9-23 11:33
用的啥例程

自带的例子  Print_WIFI

ibadcool

奈何col 发表于 2019-9-23 11:33
用的啥例程

换过几个例子,都是这个错...
HELLO_WIFI 也是

ets Jun  8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
modeIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1100
load:0x40078000,len:9564
ho 0 tail 12 room 4
load:0x40080400,len:6320
entry 0x400806a8
[51]
[51]
__       __                __
/\ \     /\ \    __        /\ \              v0.3.3
\ \ \___ \ \ \  /\_\    ___\ \ \/'\      __   _ __   
\ \ '__`\\ \ \ \/\ \ /' _ `\ \ , <    /'__`\/\`'__\
  \ \ \L\ \\ \ \_\ \ \/\ \/\ \ \ \\`\ /\  __/\ \ \./
   \ \_,__/ \ \__\\ \_\ \_\ \_\ \_\ \_\ \____\\ \_\  
    \/___/   \/__/ \/_/\/_/\/_/\/_/\/_/\/____/ \/_/  
    To better use blinker with your IoT project!
    Download latest blinker library here!
    => https://github.com/blinker-iot/blinker-library

[84] Connecting to Portland
[180] ESP32_MQTT initialized...
[180]
===========================================================
================== Blinker Timer loaded! ==================
Warning!EEPROM address 1536-2431 is used for Blinker Timer!
============= DON'T USE THESE EEPROM ADDRESS! =============
===========================================================

[2748] WiFi Connected.
[2749] IP Address:
[2749] 172.28.28.39
[4891] [HTTP] GET... failed, error: send header failed

奈何col

确保esp32 package是最新版本

ibadcool

奈何col 发表于 2019-9-23 14:06
确保esp32 package是最新版本

是最新的, 1.0.3

三水

测试了一下 ESP32-ARDUINO 1.0.3版本可以正常使用