Blinker 模拟传感器+数字传感器例程（DHT11 温湿度+气体传感）

lwq1947 · 发表于 2019-7-20 06:30

请给出dht.h库

ecstart · 发表于 2019-7-20 14:25

lwq1947 发表于 2019-7-20 06:30
请给出dht.h库

https://github.com/adafruit/DHT-sensor-library

lwq1947 · 发表于 2019-7-21 10:32

谢谢提供的DHT.H
请问楼主为什麽总是编译不过换了几种开发板都是一样错误

Arduino:1.8.5 (Windows 7), 开发板："Adafruit Feather HUZZAH ESP8266, 80 MHz, 4M (1M SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 115200"

构建选项已变更，全部重新构建
In file included from C:\Users\dell\Documents\Arduino\libraries\Blinker\src/BlinkerESPMQTT.h:10:0,

               from C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker.h:200,

               from C:\Users\dell\AppData\Local\Temp\arduino_modified_sketch_390035\BareMinimum.ino:6:

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Adapters/BlinkerMQTT.h:205:5: error: 'BearSSL' does not name a type

   BearSSL::WiFiClientSecure client_mqtt;

   ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Adapters/BlinkerMQTT.h: In member function 'virtual int BlinkerMQTT::connect()':

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Adapters/BlinkerMQTT.h:318:9: error: 'client_mqtt' was not declared in this scope

      client_mqtt.setInsecure();

      ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Adapters/BlinkerMQTT.h: In member function 'int BlinkerMQTT::connectServer()':

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Adapters/BlinkerMQTT.h:1443:5: error: 'client_mqtt' was not declared in this scope

   client_mqtt.stop();

   ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Adapters/BlinkerMQTT.h:1445:21: error: 'BearSSL' was not declared in this scope

   std::unique_ptr<BearSSL::WiFiClientSecure>client_s(new BearSSL::WiFiClientSecure);

                  ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Adapters/BlinkerMQTT.h:1445:46: error: template argument 1 is invalid

   std::unique_ptr<BearSSL::WiFiClientSecure>client_s(new BearSSL::WiFiClientSecure);

                                          ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Adapters/BlinkerMQTT.h:1445:46: error: template argument 2 is invalid

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Adapters/BlinkerMQTT.h:1445:55: error: invalid type in declaration before '(' token

   std::unique_ptr<BearSSL::WiFiClientSecure>client_s(new BearSSL::WiFiClientSecure);

                                                   ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Adapters/BlinkerMQTT.h:1445:60: error: expected type-specifier before 'BearSSL'

   std::unique_ptr<BearSSL::WiFiClientSecure>client_s(new BearSSL::WiFiClientSecure);

                                                         ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Adapters/BlinkerMQTT.h:1448:13: error: base operand of '->' is not a pointer

   client_s->setInsecure();

         ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Adapters/BlinkerMQTT.h:1463:21: error: invalid type argument of unary '*' (have 'int')

   if (http.begin(*client_s, url_iot)) {  // HTTPS

                  ^

In file included from C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:44:0,

               from C:\Users\dell\Documents\Arduino\libraries\Blinker\src/BlinkerESPMQTT.h:11,

               from C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker.h:200,

               from C:\Users\dell\AppData\Local\Temp\arduino_modified_sketch_390035\BareMinimum.ino:6:

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Functions/BlinkerOTA.h: At global scope:

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Functions/BlinkerOTA.h:13:12: error: 'BearSSL' does not name a type

   extern BearSSL::WiFiClientSecure client_mqtt;

         ^

In file included from C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:44:0,

               from C:\Users\dell\Documents\Arduino\libraries\Blinker\src/BlinkerESPMQTT.h:11,

               from C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker.h:200,

               from C:\Users\dell\AppData\Local\Temp\arduino_modified_sketch_390035\BareMinimum.ino:6:

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Functions/BlinkerOTA.h: In member function 'bool BlinkerOTA::update()':

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Functions/BlinkerOTA.h:108:5: error: 'BearSSL' has not been declared

   BearSSL::WiFiClientSecure client_s;

   ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Functions/BlinkerOTA.h:108:31: error: expected ';' before 'client_s'

   BearSSL::WiFiClientSecure client_s;

                           ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Functions/BlinkerOTA.h:112:5: error: 'client_mqtt' was not declared in this scope

   client_mqtt.stop();

   ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Functions/BlinkerOTA.h:115:17: error: 'client_s' was not declared in this scope

   bool mfln = client_s.probeMaxFragmentLength(ota_host, ota_port, 1024);

               ^

In file included from C:\Users\dell\Documents\Arduino\libraries\Blinker\src/BlinkerESPMQTT.h:11:0,

               from C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker.h:200,

               from C:\Users\dell\AppData\Local\Temp\arduino_modified_sketch_390035\BareMinimum.ino:6:

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h: In member function 'String BlinkerApi::blinkerServer(uint8_t, const String&, bool)':

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8789:20: error: 'BearSSL' does not name a type

         extern BearSSL::WiFiClientSecure client_mqtt;

                  ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8790:13: error: 'client_mqtt' was not declared in this scope

         client_mqtt.stop();

         ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8792:29: error: 'BearSSL' was not declared in this scope

         std::unique_ptr<BearSSL::WiFiClientSecure>client_s(new BearSSL::WiFiClientSecure);

                           ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8792:54: error: template argument 1 is invalid

         std::unique_ptr<BearSSL::WiFiClientSecure>client_s(new BearSSL::WiFiClientSecure);

                                                   ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8792:54: error: template argument 2 is invalid

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8792:63: error: invalid type in declaration before '(' token

         std::unique_ptr<BearSSL::WiFiClientSecure>client_s(new BearSSL::WiFiClientSecure);

                                                            ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8792:68: error: expected type-specifier before 'BearSSL'

         std::unique_ptr<BearSSL::WiFiClientSecure>client_s(new BearSSL::WiFiClientSecure);

                                                                  ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8795:21: error: base operand of '->' is not a pointer

         client_s->setInsecure();

                  ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8819:37: error: invalid type argument of unary '*' (have 'int')

                     http.begin(*client_s, url_iot);

                                 ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8832:37: error: invalid type argument of unary '*' (have 'int')

                     http.begin(*client_s, url_iot);

                                 ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8846:37: error: invalid type argument of unary '*' (have 'int')

                     http.begin(*client_s, url_iot);

                                 ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8861:37: error: invalid type argument of unary '*' (have 'int')

                     http.begin(*client_s, url_iot);

                                 ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8874:37: error: invalid type argument of unary '*' (have 'int')

                     http.begin(*client_s, url_iot);

                                 ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8887:37: error: invalid type argument of unary '*' (have 'int')

                     http.begin(*client_s, url_iot);

                                 ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8902:41: error: invalid type argument of unary '*' (have 'int')

                           http.begin(*client_s, url_iot);

                                       ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8916:41: error: invalid type argument of unary '*' (have 'int')

                           http.begin(*client_s, url_iot);

                                       ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8929:41: error: invalid type argument of unary '*' (have 'int')

                           http.begin(*client_s, url_iot);

                                       ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8941:41: error: invalid type argument of unary '*' (have 'int')

                           http.begin(*client_s, url_iot);

                                       ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8955:41: error: invalid type argument of unary '*' (have 'int')

                           http.begin(*client_s, url_iot);

                                       ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8968:41: error: invalid type argument of unary '*' (have 'int')

                           http.begin(*client_s, url_iot);

                                       ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8981:41: error: invalid type argument of unary '*' (have 'int')

                           http.begin(*client_s, url_iot);

                                       ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:8994:41: error: invalid type argument of unary '*' (have 'int')

                           http.begin(*client_s, url_iot);

                                       ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:9006:41: error: invalid type argument of unary '*' (have 'int')

                           http.begin(*client_s, url_iot);

                                       ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:9020:41: error: invalid type argument of unary '*' (have 'int')

                           http.begin(*client_s, url_iot);

                                       ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:9033:41: error: invalid type argument of unary '*' (have 'int')

                           http.begin(*client_s, url_iot);

                                       ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:9046:41: error: invalid type argument of unary '*' (have 'int')

                           http.begin(*client_s, url_iot);

                                       ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:9059:41: error: invalid type argument of unary '*' (have 'int')

                           http.begin(*client_s, url_iot);

                                       ^

C:\Users\dell\Documents\Arduino\libraries\Blinker\src/Blinker/BlinkerApi.h:9071:41: error: invalid type argument of unary '*' (have 'int')

                           http.begin(*client_s, url_iot);

                                       ^

exit status 1
为开发板 Adafruit Feather HUZZAH ESP8266 编译时出错。

在文件 -> 首选项开启
“编译过程中显示详细输出”选项
这份报告会包含更多信息。

lwq1947 · 发表于 2019-7-21 10:35

blinker库0.3.1

lwq1947 · 发表于 2019-7-24 19:47

楼主我在blinker示例程序DHT_wifi能编译通过.但是我不知温度和湿度的数据键名,请告知谢谢.

lwq1947 · 发表于 2019-7-25 12:07

通过将你的程序与DHT_WIFI示例程序对比终于发现问题所在.将你的程序中#include <DHT.h>换成
#include <modules/dht/DHT.h>就编译通过了.

liren66 · 发表于 2019-9-18 11:06

大佬你好请问你的是什么板arduino uno吗

mogbay · 发表于 2019-10-17 22:49

安卓端能不能发一下呀？？（小白求教）

foro · 发表于 2019-11-19 00:16

请问,你的温湿度可以实时显示吗?

		自动登录	找回密码
密码			立即注册

[分享] Blinker 模拟传感器+数字传感器例程（DHT11 温湿度+气体传感）