求大佬帮我看看烧录的问题！

努力学习的A

最近想搞一个单片机，现在在把程序从开发板（ardiuno uno R3）往单片机上烧录，采用一块Arduino UNO 开发板作为烧写器对待烧写单片机进行Arduino BootLoader 的烧写。然后一直有报错的情况，报错代码是这样
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x03
Problem uploading to board.  See https://support.arduino.cc/hc/en-us/sections/360003198300 for suggestions.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x03
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x03
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x03
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x03
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x03
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x03
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x03
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x03
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x03

求问大佬怎么解决！

kpj001

“ Arduino UNO 开发板作为烧写器 ” 涉及 ICSP 接线 和 菜单选择，图都没一个说啥呢

努力学习的A

kpj001 发表于 2022-10-15 11:59
“ Arduino UNO 开发板作为烧写器 ” 涉及 ICSP 接线 和 菜单选择，图都没一个说啥呢 ...

是指这个嘛？C:\Users\86133\Videos\Captures

shouzama

努力学习的A 发表于 2022-10-16 19:56
是指这个嘛？

開發板用 ARDUINO MICRO?


你還缺接線圖沒有 PO 上來喔

還有,電腦 USB 接 UNO、UNO 燒 ARDUINO AS ISP 程式、UNO 的對應
PIN 腳接到 MICRO 的 ICSP 接腳去,COM 選 UNO 的埠位址,照理應該
沒什麼問題才對,我以前就用這樣燒過,現在改用 USBISP 在燒,省下 UNO
(體積大佔空間,且只當 ARDUINO AS ISP 有點浪費,過渡期適用)