EEPROM地址问题

bigfou

使用样例Button_WiFi，稍微修改了一下，报如下警告，但是我没有哪个地方去写 EEPROM 呀。程序贴在最后面。
esp-01模块



[250]
===========================================================
================== Blinker Timer loaded! ==================
Warning!EEPROM address 1536-2431 is used for Blinker Timer!
============= DON'T USE THESE EEPROM ADDRESS! =============
===========================================================

[10044] MQTT Connected!
[10044] Freeheap: 11520
[10044] =======================================================
[10044] =========== Blinker Auto Control mode init! ===========
[10048] Warning!EEPROM address 0-1279 is used for Auto Control!
[10054] =========== DON'T USE THESE EEPROM ADDRESS! ===========
[10059] =======================================================
[33898] get button state: on
[33898] Toggle on!
[37779] get button state: off
[37779] Toggle off!



程序代码
#define BLINKER_WIFI

#include <Blinker.h>

char auth[] = "**********";
char ssid[] = "****";
char pswd[] = "****";

#define BUTTON_1 "btn-abc"
#define jdq_io 0
BlinkerButton Button1(BUTTON_1);

void button1_callback(const String & state)
{
    BLINKER_LOG("get button state: ", state);
    if (state == BLINKER_CMD_ON) {
        digitalWrite(jdq_io, LOW);

        BLINKER_LOG("Toggle on!");
        Button1.color("#FF0000");
        Button1.text("开");
        Button1.print("on");
    }
    else if (state == BLINKER_CMD_OFF) {
        digitalWrite(jdq_io, HIGH);

        BLINKER_LOG("Toggle off!");
        Button1.color("#FFFF00");
        Button1.text("关");
        Button1.print("off");
    }
}
void setup()
{
    Serial.begin(115200);
    BLINKER_DEBUG.stream(Serial);

    pinMode(jdq_io, OUTPUT);
    digitalWrite(jdq_io, LOW);

    Blinker.begin(auth, ssid, pswd);
    Button1.attach(button1_callback);
}

void loop()
{
    Blinker.run();
}

jyc001

没有报错，他只是提醒你不要去写1536-2431这段地址，他被Blinker Timer用了

奈何col

Warning不是报错，可以不用管

xiaoman_yy

解决了吗楼主

daileshan

xiaoman_yy 发表于 2020-3-9 11:09
解决了吗楼主

这不没问题吗？

ly1657813591

楼主解决了吗。我的出来这个警告就不会连接wifi了

奈何col

ly1657813591 发表于 2020-9-7 23:09
楼主解决了吗。我的出来这个警告就不会连接wifi了

这个提示无关，提示不是报错