blinker-library使用小爱同学查询传感器湿度失败

geziang · 发表于 2020-1-10 15:49

本帖最后由 geziang 于 2020-1-10 18:02 编辑

基本信息

[x] 这个问题满足提问指南
[x] 我阅读了开发文档
[x] 我使用了最新的库及APP进行测试，但是问题仍然存在
[x] 我搜索过类似问题的解决方法但是仍然无法解决
[x] 有设备端的LOG信息
[] 有编译报错信息
[x] 我已填写基本信息

设备信息

硬件: [NodeMCU]
接入方式: [WIFI]
package版本: [esp8266-arduino-2.6.3]
blinker库版本: [arduino 0.3.3]
开发环境: [Arduino]
操作系统: [Windows]

IDE 中的设置

Module: [NodeMCU 1.0(ESP-12E Module)]
Flash Size: [4MB]
lwip Variant: [v2 Lower Memory]
CPU Frequency: [80Mhz]
Upload Using: [SERIAL]

手机信息及APP信息

华为Mate10
android 10.0
blinker App版本 2.2.8

问题描述

从编译到烧写配网一切正常，手机app也可以正确显示温度和湿度。但是，使用小爱同学查询温度时正常，查询湿度时失败，说“设备沟通失败”类似意思的话。硬件上只做了温湿度两个传感器，所以没有仔细测试其他的，但是初步测试其他传感器是能够播报程序里给的假数据的，只有湿度不行。

另外，向小爱提问时可以看到硬件收到了请求的日志“MIOT Query codes: 0”和“MIOT Query All”

代码

[mw_shl_code=arduino,true]#define BLINKER_ESP_SMARTCONFIG
#define BLINKER_WIFI
#define BLINKER_MIOT_SENSOR

#include <Blinker.h>

char auth[] = "{这里是我的authkey}";

BlinkerNumber HUMI("humi");
BlinkerNumber TEMP("temp");

float humi_read = 20, temp_read = 20;

void miotQuery(int32_t queryCode)
{
BLINKER_LOG("MIOT Query codes: ", queryCode);

switch (queryCode)
{
      case BLINKER_CMD_QUERY_ALL_NUMBER :
         BLINKER_LOG("MIOT Query All");
         BlinkerMIOT.temp(temp_read);
         BlinkerMIOT.humi(humi_read);
         BlinkerMIOT.pm25(20);
         BlinkerMIOT.co2(20);
         BlinkerMIOT.print();
         break;
      default :
         BlinkerMIOT.temp(20);
         BlinkerMIOT.humi(20);
         BlinkerMIOT.pm25(20);
         BlinkerMIOT.co2(20);
         BlinkerMIOT.print();
         break;
}
}

void heartbeat()
{
HUMI.print(humi_read);
TEMP.print(temp_read);
}

void dataRead(const String & data)
{
BLINKER_LOG("Blinker readString: ", data);
Blinker.vibrate();
uint32_t BlinkerTime = millis();
Blinker.print("millis", BlinkerTime);
}

void setup() {
  Serial.begin(115200);

  BLINKER_DEBUG.stream(Serial);

  BLINKER_DEBUG.debugAll();
  Blinker.begin(auth);
  Blinker.attachData(dataRead);
  Blinker.attachHeartbeat(heartbeat);
  BlinkerMIOT.attachQuery(miotQuery);
}

void loop() {
  Blinker.run();
}[/mw_shl_code]

LOG信息

[66]

__ __ __

/\ \ /\ \ __ /\ \ v0.3.3

\ \ \___ \ \ \ /\_\ ___\ \ \/'\ __ _ __

\ \ '__`\\ \ \ \/\ \ /' _ `\ \ , < /'__`\/\`'__\

\ \ \L\ \\ \ \_\ \ \/\ \/\ \ \ \\`\ /\ __/\ \ \./

\ \_,__/ \ \__\\ \_\ \_\ \_\ \_\ \_\ \____\\ \_\

\/___/ \/__/ \/_/\/_/\/_/\/_/\/_/\/____/ \/_/

To better use blinker with your IoT project!

Download latest blinker library here!

=> https://github.com/blinker-iot/blinker-library

[100] _aliType:

[101] _duerType: &duerType=AIR_MONITOR

[105] _miType: &miType=sensor

[107] _authKey: 1ae1a31d0d43

[614] Waiting for WiFi 20s, will enter SMARTCONFIG or APCONFIG while WiFi not connect!

[2114] ESP8266_MQTT initialized...

[2114]

===========================================================

================== Blinker Timer loaded! ==================

Warning!EEPROM address 1536-2431 is used for Blinker Timer!

============= DON'T USE THESE EEPROM ADDRESS! =============

===========================================================

[2135] countdown state: false

[2136] _cdRunState: 0

[2138] _totalTime: 0

[2140] _runTime: 0

[2141] _action:

[2144] loop state: false

[2145] _lpRunState: 0

[2147] _times: 0

[2149] _tri_times: 0

[2151] _time1: 0

[2152] _action1:

[2154] _time2: 0

[2156] _action2:

[2157] _lpData: 0

[2159] WiFi Connected.

[2161] IP Address:

[2163] 192.168.3.58

[2175] [HTTP] begin: https://iot.diandeng.tech/api/v1/user/device/diy/auth?authKey={这里是我的authkey}&duerType=AIR_MONITOR&miType=sensor

[3536] [HTTP] GET... code: 200

[3543] reply was:

[3543] ==============================

[3543] {"detail": {"broker": "aliyun", "deviceName": "190006900B82K2JSYWMBAJ4W", "iotId": "rtphQJHbX7rm6uXF79oP000000", "iotToken": "127240d2376242f9abfd299845093850", "productKey": "JgCGbHlndgz", "uuid": "714b3fc9da4d66954ea123767ee80b73"}, "message": 1000}

[3560] ==============================

[3564] ====================

[3566] DEVICE_NAME_MQTT: 190006900B82K2JSYWMBAJ4W

[3570] MQTT_PRODUCTINFO_MQTT: JgCGbHlndgz

[3574] MQTT_ID_MQTT: 190006900B82K2JSYWMBAJ4W

[3578] MQTT_NAME_MQTT: rtphQJHbX7rm6uXF79oP000000

[3582] MQTT_KEY_MQTT: 127240d2376242f9abfd299845093850

[3587] MQTT_BROKER: aliyun

[3590] HOST: public.iot-as-mqtt.cn-shanghai.aliyuncs.com

[3595] PORT: 1883

[3596] UUID_MQTT: 714b3fc9da4d66954ea123767ee80b73

[3601] ====================

[3603] BLINKER_PUB_TOPIC_MQTT: /JgCGbHlndgz/190006900B82K2JSYWMBAJ4W/s

[3610] BLINKER_SUB_TOPIC_MQTT: /JgCGbHlndgz/190006900B82K2JSYWMBAJ4W/r

[3616] Freeheap: 10248

[3622] mDNS responder started

[3623] webSocket_MQTT server started

[3624] ws://190006900B82K2JSYWMBAJ4W.local:81

[4629] Current time: Fri Jan 10 16:03:34 2020

[4629] NTP time: 1578643414

[4630] time (millis() - ntpFreshTime): 4630

[4630] ntpGetTime: 0

[4631] 1

[4632] ==== needInit ====

[4634] message: /share/device?deviceName=190006900B82K2JSYWMBAJ4W&key=1ae1a31d0d43

[4642] blinker server begin

[4644] Freeheap: 32104

[5631] HTTPS begin: https://iot.diandeng.tech/api/v1/user/device/share/device?deviceName=190006900B82K2JSYWMBAJ4W&key={这里是我的authkey}

[5631] HTTPS payload: /share/device?deviceName=190006900B82K2JSYWMBAJ4W&key={这里是我的authkey}

[5639] [HTTP] status... code: 200

[5644] {"detail": {"users": []}, "message": 1000}

[5647] payload: {"users":[]}

[5651] sharers data: {"users":[]}

[5653] load timing

[5655] load timing taskCount: 0

[5657] freshTiming wDay: 5, nowMins: 963, nowSeconds: 57815

[5662] nextTask: 10 apartSeconds: 28585 wDay: 5

[5667] cbackData: 10

[5668] change apartSeconds: 3600

[5772] Connecting to MQTT...

[6942] MQTT Connected!

[6942] Freeheap: 11288

[6943] millis: 6942, connect_time: 4632

[6943] MQTT conn init success

[25608] Got: {"deviceType":"DiyArduino","data":{"get":"state"},"fromDevice":"MIOT","toDevice":"190006900B82K2JSYWMBAJ4W"}

[25609] data: {"get":"state"}

[25611] fromDevice: MIOT

[25613] form MIOT

[25635] MIOT parse data: {"get":"state"}

[25635] MIOT Query codes: 0

[25636] MIOT Query All

[25637] response to MIOT: {"temp":"20.00","humi":"20.00","pm25":"20","co2":"20"}

[25640] isJson: {"data":{"temp":"20.00","humi":4

[25740] {"data":{"temp":"20.00","humi":"20.00","pm25":"20","co2":"20"},"fromDevice":"190006900B82K2JSYWMBAJ4W","toDevice":"MIOT_r","deviceType":"vAssistant"}

[25743] ...OK!

[25744] Freeheap: 9464

[32025] Got: {"deviceType":"DiyArduino","data":{"get":"state"},"fromDevice":"MIOT","toDevice":"190006900B82K2JSYWMBAJ4W"}

[32026] data: {"get":"state"}

[32027] fromDevice: MIOT

[32029] form MIOT

[32052] MIOT parse data: {"get":"state"}

[32052] MIOT Query codes: 0

[32052] MIOT Query All

[32053] response to MIOT: {"temp":"20.00","humi":"20.00","pm25":"20","co2":"20"}

[32056] isJson: {"data":{"temp":"20.00","humi":[32119] {"data":{"temp":"20.00","humi":"20.00","pm25":"20","co2":"20"},"fromDevice":"190006900B82K2JSYWMBAJ4W","toDevice":"MIOT_r","deviceType":"vAssistant"}

[32122] ...OK!

[32123] Freeheap: 9464

奈何col · 发表于 2020-1-11 00:09

不是bug，小爱方面湿度只接收整数，你传的浮点数。
建议下次使用我们提供的例程测试，我们例程是无误的。

geziang · 发表于 2020-1-11 17:09

奈何col 发表于 2020-1-11 00:09
不是bug，小爱方面湿度只接收整数，你传的浮点数。
建议下次使用我们提供的例程测试，我们例程是无误的。
...

好的，感谢回复，抱歉

641415602 · 发表于 2020-4-8 21:49

奈何col 发表于 2020-1-11 00:09
不是bug，小爱方面湿度只接收整数，你传的浮点数。
建议下次使用我们提供的例程测试，我们例程是无误的。
...

你用小爱语音控制的时候有没有出现过
嗯，尝试了一下，先看看设备状态吧
这样的问题啊
串口输出为error none query function set！

KillingJacky · 发表于 2020-4-12 22:54

奈何col 发表于 2020-1-11 00:09
不是bug，小爱方面湿度只接收整数，你传的浮点数。
建议下次使用我们提供的例程测试，我们例程是无误的。
...

请问通过小爱调用你们平台的限制是什么？限频次？还是排队优先级啊？
免费和付费各是多少？
用node-red搭了个东西控制家里氛围灯，小爱总是回复“设备不理小爱”，在node-red日志观察，get state请求基本上会在10秒后到达，这延迟。。。不太好玩啊。

奈何col · 发表于 2020-4-13 00:11

KillingJacky 发表于 2020-4-12 22:54
请问通过小爱调用你们平台的限制是什么？限频次？还是排队优先级啊？
免费和付费各是多少？
用node-red搭 ...

没有限制，有用户反映手机小爱正常，但小爱音响不正常，原因暂时未知，不一定是我们的问题。
不清楚你说的get:state是指什么，如果是app和设备通信，10秒是不可能的，默认使用的是阿里broker，再慢也就几百ms，更可能是你程序问题，导致的。

KillingJacky · 发表于 2020-4-13 14:24

奈何col 发表于 2020-4-13 00:11
没有限制，有用户反映手机小爱正常，但小爱音响不正常，原因暂时未知，不一定是我们的问题。
不清楚你说 ...

Blinder app与设备通信是没有问题，延迟不大，
那就说明你们与小爱的云云对接那里延迟有点大。

		自动登录	找回密码
密码			立即注册

[已解答] blinker-library使用小爱同学查询传感器湿度失败

点评