[mw_shl_code=applescript,true]/* PS2Keyboard library example
PS2Keyboard now requries both pins specified for begin()
keyboard.begin(data_pin, irq_pin);
Valid irq pins:
Arduino: 2, 3
Arduino Mega: 2, 3, 18, 19, 20, 21
Teensy 1.0: 0, 1, 2, 3, 4, 6, 7, 16
Teensy 2.0: 5, 6, 7, 8
Teensy++ 1.0: 0, 1, 2, 3, 18, 19, 36, 37
Teensy++ 2.0: 0, 1, 2, 3, 18, 19, 36, 37
Sanguino: 2, 10, 11
for more information you can read the original wiki in arduino.cc
at
http://www.arduino.cc/playground/Main/PS2Keyboard
or
http://www.pjrc.com/teensy/td_libs_PS2Keyboard.html
Like the Original library and example this is under LGPL license.
Modified by
Cuninganreset@gmail.com on 2010-03-22
Modified by Paul Stoffregen <
paul@pjrc.com> June 2010
*/
#include "PS2Keyboard.h"
const int DataPin = 2;
const int IRQpin = 3;
PS2Keyboard keyboard;
void setup() {
delay(1000);
keyboard.begin(DataPin, IRQpin);
Serial.begin(9600);
Serial.println("Keyboard Test:");
}
void loop() {
if (keyboard.available()) {
// read the next key
char c = keyboard.read();
// check for some of the special keys
if (c == PS2_ENTER) {
Serial.println();
} else if (c == PS2_TAB) {
Serial.print("[Tab]");
} else if (c == PS2_ESC) {
Serial.print("[ESC]");
} else if (c == PS2_PAGEDOWN) {
Serial.print("[PgDn]");
} else if (c == PS2_PAGEUP) {
Serial.print("[PgUp]");
} else if (c == PS2_LEFTARROW) {
Serial.print("[Left]");
} else if (c == PS2_RIGHTARROW) {
Serial.print("[Right]");
} else if (c == PS2_UPARROW) {
Serial.print("[Up]");
} else if (c == PS2_DOWNARROW) {
Serial.print("[Down]");
} else if (c == PS2_DELETE) {
Serial.print("[Del]");
} else {
// otherwise, just print all normal characters
Serial.print(c);
}
}
}[/mw_shl_code]
发表于 2017-2-5 14:22
楼主