AP配网，重启检测不到配网信息。ESP配网，重启能检测到配网-Arduino中文社区 - Powered by Discuz!
设为首页收藏本站

Arduino中文社区

 找回密码
 立即注册

QQ登录

只需一步，快速开始

Arduino中文社区»首页 › 热门平台与项目 › 点灯·blinker › AP配网，重启检测不到配网信息。ESP配网，重启能检测到 ...
返回列表 发新帖
查看: 1001|回复: 4

[已处理] AP配网，重启检测不到配网信息。ESP配网，重启能检测到配网

[复制链接]
wangjing123
发表于 2021-12-13 22:15 | 显示全部楼层 |阅读模式
本帖最后由 wangjing123 于 2021-12-13 22:18 编辑
  1. 这是AP配网串口信息
  2. 21:40:04.739 -> [69]
  3. 21:40:04.739 ->  __       __                __
  4. 21:40:04.739 -> /\ \     /\ \    __        /\ \              v0.3.80210803
  5. 21:40:04.739 -> \ \ \___ \ \ \  /\_\    ___\ \ \/'\      __   _ __   
  6. 21:40:04.739 ->  \ \ '__`\\ \ \ \/\ \ /' _ `\ \ , <    /'__`\/\`'__\
  7. 21:40:04.739 ->   \ \ \L\ \\ \ \_\ \ \/\ \/\ \ \ \\`\ /\  __/\ \ \./
  8. 21:40:04.739 ->    \ \_,__/ \ \__\\ \_\ \_\ \_\ \_\ \_\ \____\\ \_\  
  9. 21:40:04.786 ->     \/___/   \/__/ \/_/\/_/\/_/\/_/\/_/\/____/ \/_/  
  10. 21:40:04.786 ->     To better use blinker with your IoT project!
  11. 21:40:04.786 ->     Download latest blinker library here!
  12. 21:40:04.786 ->     => https://github.com/blinker-iot/blinker-library
  13. 21:40:04.786 ->
  14. 21:40:04.786 -> [103] _aliType: &aliType=outlet
  15. 21:40:04.786 -> [106] _duerType:
  16. 21:40:04.786 -> [108] _miType:
  17. 21:40:04.786 -> [109] _authKey: 直接隐掉，怕泄露
  18. 21:40:04.786 -> [114] check wlan config
  19. 21:40:04.786 -> [115] wlan config check,success
  20. 21:40:05.301 -> [617] Connecting to WiFi:
  21. 21:40:05.301 -> [617] ESP8266_MQTT initialized...
  22. 21:40:05.301 -> [617]
  23. 21:40:05.301 -> ===========================================================
  24. 21:40:05.301 -> ================== Blinker Timer loaded! ==================
  25. 21:40:05.301 ->      EEPROM address 1536-2431 is used for Blinker Timer!
  26. 21:40:05.301 -> ========= PLEASE AVOID USING THESE EEPROM ADDRESS! ========
  27. 21:40:05.301 -> ===========================================================
  28. 21:40:05.301 ->
  29. 21:40:05.301 -> [640] countdown state: false
  30. 21:40:05.301 -> [641] _cdRunState: 0
  31. 21:40:05.301 -> [643] _totalTime: 0
  32. 21:40:05.301 -> [644] _runTime: 0
  33. 21:40:05.348 -> [646] _action:
  34. 21:40:05.348 -> [648] loop state: false
  35. 21:40:05.348 -> [650] _lpRunState: 0
  36. 21:40:05.348 -> [652] _times: 0
  37. 21:40:05.348 -> [653] _tri_times: 0
  38. 21:40:05.348 -> [655] _time1: 0
  39. 21:40:05.348 -> [656] _action1:
  40. 21:40:05.348 -> [658] _time2: 0
  41. 21:40:05.348 -> [659] _action2:
  42. 21:40:05.348 -> [661] _lpData: 0
  43. 21:40:05.348 -> [663] checkNum count: 1
复制代码
  1. 这是ESP配网后串口信息
  2. 21:59:22.332 -> [70]
  3. 21:59:22.332 ->  __       __                __
  4. 21:59:22.332 -> /\ \     /\ \    __        /\ \              v0.3.80210803
  5. 21:59:22.332 -> \ \ \___ \ \ \  /\_\    ___\ \ \/'\      __   _ __   
  6. 21:59:22.332 ->  \ \ '__`\\ \ \ \/\ \ /' _ `\ \ , <    /'__`\/\`'__\
  7. 21:59:22.379 ->   \ \ \L\ \\ \ \_\ \ \/\ \/\ \ \ \\`\ /\  __/\ \ \./
  8. 21:59:22.379 ->    \ \_,__/ \ \__\\ \_\ \_\ \_\ \_\ \_\ \____\\ \_\  
  9. 21:59:22.379 ->     \/___/   \/__/ \/_/\/_/\/_/\/_/\/_/\/____/ \/_/  
  10. 21:59:22.379 ->     To better use blinker with your IoT project!
  11. 21:59:22.379 ->     Download latest blinker library here!
  12. 21:59:22.379 ->     => https://github.com/blinker-iot/blinker-library
  13. 21:59:22.379 ->
  14. 21:59:22.379 -> [104] _aliType: &aliType=outlet
  15. 21:59:22.379 -> [107] _duerType:
  16. 21:59:22.379 -> [109] _miType:
  17. 21:59:22.379 -> [110] _authKey: 直接隐掉，怕泄露
  18. 21:59:22.379 -> [115] check wlan config
  19. 21:59:22.379 -> [116] wlan config check,success
  20. 21:59:22.898 -> [620] Connecting to WiFi: JR_home
  21. 21:59:22.898 -> [620] ESP8266_MQTT initialized...
  22. 21:59:22.898 -> [620]
  23. 21:59:22.898 -> ===========================================================
  24. 21:59:22.898 -> ================== Blinker Timer loaded! ==================
  25. 21:59:22.898 ->      EEPROM address 1536-2431 is used for Blinker Timer!
  26. 21:59:22.898 -> ========= PLEASE AVOID USING THESE EEPROM ADDRESS! ========
  27. 21:59:22.898 -> ===========================================================
  28. 21:59:22.898 ->
  29. 21:59:22.898 -> [643] countdown state: false
  30. 21:59:22.945 -> [644] _cdRunState: 0
  31. 21:59:22.945 -> [646] _totalTime: 0
  32. 21:59:22.945 -> [647] _runTime: 0
  33. 21:59:22.945 -> [649] _action:
  34. 21:59:22.945 -> [651] loop state: false
  35. 21:59:22.945 -> [653] _lpRunState: 0
  36. 21:59:22.945 -> [655] _times: 0
  37. 21:59:22.945 -> [656] _tri_times: 0
  38. 21:59:22.945 -> [658] _time1: 0
  39. 21:59:22.945 -> [659] _action1:
  40. 21:59:22.945 -> [661] _time2: 0
  41. 21:59:22.945 -> [662] _action2:
  42. 21:59:22.945 -> [664] _lpData: 0
  43. 21:59:22.945 -> [666] checkNum count: 1
复制代码
之前有个帖子也是这个问题，https://www.arduino.cn/forum.php ... 105224&highlight=ap我用的是最新的两个库，我看工作人员说这两个用同一段代码存储配网信息，但是AP配网后断电重启就是检测不到配网，ESP配网后断电可以检测到配网，
建议工作人员去试一下这俩个例程，配网后断电重启看看能否检测到配网信息
回复

举报

点灯官方
发表于 2021-12-14 09:07 | 显示全部楼层
收到，待我们确认原因
回复 支持 反对

举报

wangjing123
 楼主| 发表于 2021-12-15 14:22 | 显示全部楼层
点灯官方 发表于 2021-12-14 09:07
收到，待我们确认原因

好的，请尽快确认
回复 支持 反对

举报

点灯官方
发表于 2021-12-25 12:10 | 显示全部楼层
我们初步排查，问题是由8266 package 3.0.x引起的，暂不清楚是package变更还是bug。
如果您现在有apconfig使用需求，可以先使用 2.7.4 package。待我们确定原因后，再更新到3.0.x
回复 支持 反对

举报

三水
发表于 2021-12-29 21:10 | 显示全部楼层
https://github.com/blinker-iot/b ... s/heads/dev_3.0.zip

更新最新库测试 已修复
回复 支持 反对

举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|Archiver|手机版|Arduino中文社区

GMT+8, 2024-12-1 07:11 , Processed in 0.122017 second(s), 16 queries .

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表