Arduino:1.8.13 (Windows 10), 开发板："Generic ESP8266 Module, 80 MHz, Flash, Disabled (new aborts on oom), Disabled, All SSL ciphers (most compatible), 32KB cache + 32KB IRAM (balanced), Use pgm_read macros for IRAM/PROGMEM, dtr (aka nodemcu), 26 MHz, 40MHz, QIO (fast), 1MB (FS:64KB OTA:~470KB), 2, nonos-sdk 2.2.1+100 (190703), v2 Lower Memory, Disabled, None, Only Sketch, 115200"
Executable segment sizes:
ICACHE : 32768 - flash instruction cache
IROM : 499232 - code in flash (default or ICACHE_FLASH_ATTR)
IRAM : 28885 / 32768 - code in IRAM (IRAM_ATTR, ISRs...)
DATA : 1748 ) - initialized variables (global, static) in RAM/HEAP
RODATA : 3832 ) / 81920 - constants (global, static) in RAM/HEAP
BSS : 30832 ) - zeroed variables (global, static) in RAM/HEAP
项目使用了 533697 字节，占用了 (55%) 程序存储空间。最大为 958448 字节。
全局变量使用了36412字节，(44%)的动态内存，余留45508字节局部变量。最大为81920字节。
esptool.py v3.0
Serial port COM4
Connecting........_____....._____....._____....._____....._____....._____.....____Traceback (most recent call last):
File "C:\Users\win\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.0.1/tools/upload.py", line 66, in <module>
esptool.main(cmdline)
File "C:/Users/win/AppData/Local/Arduino15/packages/esp8266/hardware/esp8266/3.0.1/tools/esptool\esptool.py", line 3552, in main
esp.connect(args.before, args.connect_attempts)
File "C:/Users/win/AppData/Local/Arduino15/packages/esp8266/hardware/esp8266/3.0.1/tools/esptool\esptool.py", line 529, in connect
raise FatalError('Failed to connect to %s: %s' % (self.CHIP_NAME, last_error))
esptool.FatalError: Failed to connect to ESP8266: Timed out waiting for packet header
esptool.FatalError: Failed to connect to ESP8266: Timed out waiting for packet header
_
在文件 -> 首选项开启
“编译过程中显示详细输出”选项
这份报告会包含更多信息。
是没有进入下载模式么
|
发表于 2021-10-16 19:57
楼主