想使用APConfig进行配网，程序总是验证不过去，请大神指教
程序如下：
#define BLINKER_WIFI
#define BLINKER_APCONFIG
#include <Blinker.h>
//char auth[] = "b1ac8363d080";
//char ssid[] = "DianZhanYuan";
//char pswd[] = "6163a51a0272";
#include <DHT.h>
BlinkerNumber HUMI("humi");
BlinkerNumber TEMP("temp");
#define DHTPIN D5
#define DHTTYPE DHT11 // DHT 11
//#define DHTTYPE DHT22 // DHT 22(AM2302), AM2321
//#define DHTTYPE DHT21 // DHT 21 (AM2301)
DHT dht(DHTPIN, DHTTYPE);
float humi_read = 0, temp_read = 0;
void dataStorage()
{
Blinker.dataStorage("temp", temp_read);
Blinker.dataStorage("humi", humi_read);
}
//void heartbeat()
//{
// HUMI.print(humi_read);
// TEMP.print(temp_read);
//}
void setup()
{
Serial.begin(115200);
BLINKER_DEBUG.stream(Serial);
BLINKER_DEBUG.debugAll();
pinMode(LED_BUILTIN, OUTPUT);
digitalWrite(LED_BUILTIN, LOW);
Blinker.begin( );//此处参数为空？auth, ssid, pswd
Blinker.attachDataStorage(dataStorage);
// Blinker.attachHeartbeat(heartbeat);
dht.begin();
}
void loop()
{
Blinker.run();
float h = dht.readHumidity();
float t = dht.readTemperature();
if (isnan(h) || isnan(t))
{
BLINKER_LOG("Failed to read from DHT sensor!");
}
else
{
BLINKER_LOG("Humidity: ", h, " %");
BLINKER_LOG("Temperature: ", t, " *C");
HUMI.print(h);
TEMP.print(t);
humi_read = h;
temp_read = t;
}
Blinker.delay(2000);
}
报错信息：
Arduino:1.8.7 (Windows 10), 开发板："ESPDuino (ESP-13 Module), ESPduino-V2, 80 MHz, Flash, 4M (no SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 115200"
In file included from C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/BlinkerESPMQTT.h:10:0,
from C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker.h:36,
from C:\Users\lenovo\Desktop\YanZheng-AP-MoShi\YanZheng-AP-MoShi.ino:4:
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Adapters/BlinkerMQTT.h: In member function 'virtual char* BlinkerMQTT::lastRead()':
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Adapters/BlinkerMQTT.h:684:17: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
else return "";
^
In file included from C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h:82:0,
from C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/BlinkerESPMQTT.h:11,
from C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker.h:36,
from C:\Users\lenovo\Desktop\YanZheng-AP-MoShi\YanZheng-AP-MoShi.ino:4:
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApiBase.h: In member function 'char* BlinkerBridge_key::getName()':
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApiBase.h:194:29: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
else return "false";
^
In file included from C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h:83:0,
from C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/BlinkerESPMQTT.h:11,
from C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker.h:36,
from C:\Users\lenovo\Desktop\YanZheng-AP-MoShi\YanZheng-AP-MoShi.ino:4:
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerProtocol.h: In member function 'char* BlinkerProtocol::deviceName()':
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerProtocol.h:97:86: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
char * deviceName() { if (isInit) return conn->deviceName(); else return ""; }
^
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerProtocol.h: In member function 'char* BlinkerProtocol::authKey()':
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerProtocol.h:98:83: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
char * authKey() { if (isInit) return conn->authKey(); else return "";}
^
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerProtocol.h: In member function 'char* BlinkerProtocol::dataParse()':
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerProtocol.h:228:86: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
char* dataParse() { if (canParse) return conn->lastRead(); else return ""; }
^
In file included from C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/BlinkerESPMQTT.h:11:0,
from C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker.h:36,
from C:\Users\lenovo\Desktop\YanZheng-AP-MoShi\YanZheng-AP-MoShi.ino:4:
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h: At global scope:
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h:764:97: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
BlinkerWidgets_string _BUILTIN_SWITCH = BlinkerWidgets_string(BLINKER_CMD_BUILTIN_SWITCH);
^
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h: In member function 'char* BlinkerApi::bridgeKey(uint8_t)':
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h:6328:21: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
else return "";
^
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h: In member function 'char* BlinkerApi::bridgeName(uint8_t)':
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h:6335:21: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
else return "false";
^
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h: In member function 'char* BlinkerApi::widgetName_str(uint8_t)':
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h:6960:17: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
else return "";
^
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h: In member function 'char* BlinkerApi::widgetName_rgb(uint8_t)':
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h:6974:17: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
else return "";
^
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h: In member function 'char* BlinkerApi::widgetName_int(uint8_t)':
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h:6980:17: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
else return "";
^
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h: In member function 'char* BlinkerApi::widgetName_tab(uint8_t)':
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker/BlinkerApi.h:6986:17: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
else return "";
^
C:\Users\lenovo\Desktop\YanZheng-AP-MoShi\YanZheng-AP-MoShi.ino: At global scope:
C:\Users\lenovo\Desktop\YanZheng-AP-MoShi\YanZheng-AP-MoShi.ino:14:26: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
BlinkerNumber HUMI("humi");
^
C:\Users\lenovo\Desktop\YanZheng-AP-MoShi\YanZheng-AP-MoShi.ino:15:26: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
BlinkerNumber TEMP("temp");
^
C:\Users\lenovo\Desktop\YanZheng-AP-MoShi\YanZheng-AP-MoShi.ino: In function 'void dataStorage()':
C:\Users\lenovo\Desktop\YanZheng-AP-MoShi\YanZheng-AP-MoShi.ino:29:42: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
Blinker.dataStorage("temp", temp_read);
^
C:\Users\lenovo\Desktop\YanZheng-AP-MoShi\YanZheng-AP-MoShi.ino:30:42: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
Blinker.dataStorage("humi", humi_read);
^
C:\Users\lenovo\Desktop\YanZheng-AP-MoShi\YanZheng-AP-MoShi.ino: In function 'void setup()':
YanZheng-AP-MoShi:47:20: error: no matching function for call to 'BlinkerESPMQTT::begin()'
Blinker.begin( );//姝ゅ鍙傛暟涓虹┖auth, ssid, pswd
^
C:\Users\lenovo\Desktop\YanZheng-AP-MoShi\YanZheng-AP-MoShi.ino:47:20: note: candidate is:
In file included from C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/Blinker.h:36:0,
from C:\Users\lenovo\Desktop\YanZheng-AP-MoShi\YanZheng-AP-MoShi.ino:4:
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/BlinkerESPMQTT.h:32:14: note: void BlinkerESPMQTT::begin(const char*)
void begin(const char* _auth)
^
C:\Users\lenovo\Documents\Arduino\libraries\blinker-library-master\src/BlinkerESPMQTT.h:32:14: note: candidate expects 1 argument, 0 provided
exit status 1
no matching function for call to 'BlinkerESPMQTT::begin()'
在文件 -> 首选项开启
“编译过程中显示详细输出”选项
这份报告会包含更多信息。
本帖最后由 out 于 2020-4-26 11:18 编辑
括号要加配网
Blinker.begin(auth);//此处参数为空？auth, ssid, pswd 本帖最后由 小二元 于 2020-4-26 11:23 编辑
out 发表于 2020-4-26 10:59
括号要加配网
Blinker.begin(auth,ssid,pswd );//此处参数为空？auth, ssid, pswd
改了还是有错误，已经试验过了，应该改为Blinker.begin(auth);谢谢了
本帖最后由 out 于 2020-4-26 11:25 编辑
去掉虚拟路径 char auth[] = "b1ac8363d080";
Blinker.begin(auth);//此处参数为空？auth, ssid, pswd
错误的地方改成(char*)，比如： else return "";
改成: else return (char*)"";
页:
[1]