想做一个接入小爱的RGB氛围灯-求代码-Arduino中文社区

qq260091118 发表于 2020-3-26 15:51

想做一个接入小爱的RGB氛围灯-求代码

WS2812灯带和控制模块都准备好了，找到的代码可能是ESP32的，好像代码不适用ESP8266-01S 求大神赐代码，跪求！跪求！跪求！！！

搞笑的山贼 发表于 2020-3-26 17:02

#define BLINKER_WIFI/////////////////// wifi
#define BLINKER_MIOT_LIGHT ////////////语音助手

#include <Blinker.h>

char auth[] = "b6482886a3d0";//////////手机下载 blinker app 安卓应用商店苹果在https://www.diandeng.tech/home app-右上角+ DIY设备：Arduino 添加后得到该授权码
char ssid[] = "智能家居专用";/////wifi ssid
char pswd[] = "fk123456..";///wifi 密码
int openState = 0; ///默认为单色模式
// Download Adafruit_NeoPixel library here:
// https://github.com/adafruit/Adafruit_NeoPixel
#include <Adafruit_NeoPixel.h>

#define PIN          2 ////开发板的引脚编号接WS2812 dataVCC--VCCGND-GND DATA/DI(DATA INPUT)--17 具体看产品说明
#define NUMPIXELS    22////开发板灯灯珠数量位
Adafruit_NeoPixel pixels = Adafruit_NeoPixel(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800);
#define BUTTON_1 "ButtonKey" ///////////////【APP内用来控制呼吸灯开关】app中添加开关按键数据键名ButtonKey一致即可注意大小写
#define RGB_1 "RGBKey"          ///////////////【APP内用来控制颜色及亮度】app中添加调色盘数据键名RGBKey一致即可

BlinkerRGB WS2812(RGB_1);
BlinkerButton Button1(BUTTON_1);
uint8_t colorR, colorG, colorB, colorW;
bool wsState;
uint8_t wsMode = BLINKER_CMD_MIOT_DAY;

void pixelShow()
{
pixels.setBrightness(colorW);

for (int i = 0; i < NUMPIXELS; i++) {
pixels.setPixelColor(i, colorR, colorG, colorB);
}
pixels.show();
}

void ws2812_callback(uint8_t r_value, uint8_t g_value, uint8_t b_value, uint8_t bright_value)
{
digitalWrite(LED_BUILTIN, !digitalRead(LED_BUILTIN));
openState = 0;
Button1.print("off");
BLINKER_LOG("R value: ", r_value);
BLINKER_LOG("G value: ", g_value);
BLINKER_LOG("B value: ", b_value);
BLINKER_LOG("Rrightness value: ", bright_value);

colorR = r_value;
colorG = g_value;
colorB = b_value;
colorW = bright_value;

pixelShow();
}
void button1_callback(const String & state)
{
digitalWrite(LED_BUILTIN, !digitalRead(LED_BUILTIN));
BLINKER_LOG("get button state: ", state);

if (state == BLINKER_CMD_ON) {
BLINKER_LOG("Toggle on!");
Button1.print("on");
openState = 1;
}
else if (state == BLINKER_CMD_OFF) {
BLINKER_LOG("Toggle off!");
Button1.print("off");
openState = 0;
}

}

uint32_t getColor()
{
uint32_t color = colorR << 16 | colorG << 8 | colorB;

return color;
}

void miotPowerState(const String & state)
{
BLINKER_LOG("need set power state: ", state);

if (state == BLINKER_CMD_ON) {
digitalWrite(LED_BUILTIN, HIGH);

BlinkerMIOT.powerState("on");
BlinkerMIOT.print();

wsState =true;

if (colorW==0) colorW =255;
}
else if (state == BLINKER_CMD_OFF) {
digitalWrite(LED_BUILTIN, HIGH);

BlinkerMIOT.powerState("off");
BlinkerMIOT.print();

wsState = false;
if (colorW >0) colorW = 0;

}

pixelShow();
}
///////////////////////////////////////////////////////呼吸灯
uint32_t Wheel(byte WheelPos) {
WheelPos = 255 - WheelPos;
if (WheelPos < 85) {
return pixels.Color(255 - WheelPos * 3, 0, WheelPos * 3);
}
if (WheelPos < 170) {
WheelPos -= 85;
return pixels.Color(0, WheelPos * 3, 255 - WheelPos * 3);
}
WheelPos -= 170;
return pixels.Color(WheelPos * 3, 255 - WheelPos * 3, 0);
}

void rainbow(uint8_t wait) {
uint16_t i, j;

for (j = 0; j < 256; j++) {
for (i = 0; i < pixels.numPixels(); i++) {
   //time_show();
   // dhtShow();
   pixels.setPixelColor(i, Wheel((i + j) & 255));
}
pixels.show();
delay(wait);
}
}

void miotColor(int32_t color)
{
BLINKER_LOG("need set color: ", color);

colorR = color >> 16 & 0xFF;
colorG = color >>8 & 0xFF;
colorB = color    & 0xFF;

BLINKER_LOG("colorR: ", colorR, ", colorG: ", colorG, ", colorB: ", colorB);

pixelShow();

BlinkerMIOT.color(color);
BlinkerMIOT.print();
}

void miotMode(uint8_t mode)
{
BLINKER_LOG("need set mode: ", mode);

if (mode == BLINKER_CMD_MIOT_DAY) {
//日光模式小爱同学的语音命令模式中文名称参考 https://www.diandeng.tech/doc/xiaoai
}
else if (mode == BLINKER_CMD_MIOT_NIGHT) {
// Your mode function
}
else if (mode == BLINKER_CMD_MIOT_COLOR) {
// Your mode function
openState = 0;
}
else if (mode == BLINKER_CMD_MIOT_WARMTH) {
// Your mode function
}
else if (mode == BLINKER_CMD_MIOT_TV) {
// Your mode function
}
else if (mode == BLINKER_CMD_MIOT_READING) {
// Your mode function
}
else if (mode == BLINKER_CMD_MIOT_COMPUTER) {
// 电脑模式
openState = 1;
}

wsMode = mode;

BlinkerMIOT.mode(mode);
BlinkerMIOT.print();
}

void miotBright(const String & bright)
{
BLINKER_LOG("need set brightness: ", bright);

colorW = bright.toInt();

BLINKER_LOG("now set brightness: ", colorW);

pixelShow();

BlinkerMIOT.brightness(colorW);
BlinkerMIOT.print();
}

void miotColoTemp(int32_t colorTemp)
{
BLINKER_LOG("need set colorTemperature: ", colorTemp);

BlinkerMIOT.colorTemp(colorTemp);
BlinkerMIOT.print();
}

void miotQuery(int32_t queryCode)
{
BLINKER_LOG("MIOT Query codes: ", queryCode);

switch (queryCode)
{
case BLINKER_CMD_QUERY_ALL_NUMBER :
   BLINKER_LOG("MIOT Query All");
   BlinkerMIOT.powerState(wsState ? "on" : "off");
   BlinkerMIOT.color(0);
   BlinkerMIOT.mode(0);
   BlinkerMIOT.colorTemp(1000);
   BlinkerMIOT.brightness(1);
   BlinkerMIOT.print();
   break;
case BLINKER_CMD_QUERY_POWERSTATE_NUMBER :
   BLINKER_LOG("MIOT Query Power State");
   BlinkerMIOT.powerState(wsState ? "on" : "off");
   BlinkerMIOT.print();
   break;
case BLINKER_CMD_QUERY_COLOR_NUMBER :
   BLINKER_LOG("MIOT Query Color");
   BlinkerMIOT.color(0);
   BlinkerMIOT.print();
   break;
case BLINKER_CMD_QUERY_MODE_NUMBER :
   BLINKER_LOG("MIOT Query Mode");
   BlinkerMIOT.mode(0);
   BlinkerMIOT.print();
   break;
case BLINKER_CMD_QUERY_COLORTEMP_NUMBER :
   BLINKER_LOG("MIOT Query ColorTemperature");
   BlinkerMIOT.colorTemp(1000);
   BlinkerMIOT.print();
   break;
case BLINKER_CMD_QUERY_BRIGHTNESS_NUMBER :
   BLINKER_LOG("MIOT Query Brightness");
   BlinkerMIOT.brightness(1);
   BlinkerMIOT.print();
   break;
default :
   BlinkerMIOT.powerState(wsState ? "on" : "off");
   BlinkerMIOT.color(0);
   BlinkerMIOT.mode(0);
   BlinkerMIOT.colorTemp(1000);
   BlinkerMIOT.brightness(1);
   BlinkerMIOT.print();
   break;
}
}

void dataRead(const String & data)
{
BLINKER_LOG("Blinker readString: ", data);

Blinker.vibrate();

uint32_t BlinkerTime = millis();

Blinker.print("millis", BlinkerTime);
}

void setup()
{
Serial.begin(115200);
BLINKER_DEBUG.stream(Serial);
BLINKER_DEBUG.debugAll();

pinMode(LED_BUILTIN, OUTPUT);
digitalWrite(LED_BUILTIN, LOW);

Blinker.begin(auth, ssid, pswd);
Blinker.attachData(dataRead);

BlinkerMIOT.attachPowerState(miotPowerState);
BlinkerMIOT.attachColor(miotColor);
BlinkerMIOT.attachMode(miotMode);
BlinkerMIOT.attachBrightness(miotBright);
BlinkerMIOT.attachColorTemperature(miotColoTemp);
BlinkerMIOT.attachQuery(miotQuery);

pinMode(14, OUTPUT);
digitalWrite(14, HIGH);
pinMode(15, OUTPUT);
digitalWrite(15, HIGH);

colorR = 255;
colorG = 255;
colorB = 255;
colorW = 0;
wsState = true;

pixels.begin();
pixels.setBrightness(colorW);
WS2812.attach(ws2812_callback);
Button1.attach(button1_callback);
pixelShow();
}

void loop()
{
Blinker.run();
if (openState == 0)
{
pixelShow();
//Button1.print("off");

}
else if (openState == 1)
{
rainbow(15);/////////15呼吸灯的频率
//Button1.print("on");
}
}

Creeper666 发表于 2020-3-26 16:04

https://github.com/blinker-iot/blinker-library/blob/master/examples/Blinker_WS2812/WS2812_WiFi/WS2812_WiFi.ino

n1001 发表于 2020-3-26 16:04

照着示例改就行，ESP32和ESP8266的库很多部分是相同的

qq260091118 发表于 2020-4-23 10:39

搞笑的山贼发表于 2020-3-26 17:02
#define BLINKER_WIFI/////////////////// wifi
#define BLINKER_MIOT_LIGHT ////////////语音助手

感谢感谢，

932045152 发表于 2020-4-26 13:21

搞笑的山贼发表于 2020-3-26 17:02
#define BLINKER_WIFI/////////////////// wifi
#define BLINKER_MIOT_LIGHT ////////////语音助手

你那个按键没有用啊

932045152 发表于 2020-4-26 13:22

qq260091118 发表于 2020-4-23 10:39
感谢感谢，

他那个按键是不是没用，只有调色盘有用，并且，跑马灯只有四个颜色，只有一个跑马灯模式

qq260091118 发表于 2020-4-27 11:17

932045152 发表于 2020-4-26 13:22
他那个按键是不是没用，只有调色盘有用，并且，跑马灯只有四个颜色，只有一个跑马灯模式 ...

调色盘控制颜色亮度和开关，按键点击一下就是跑马灯

932045152 发表于 2020-4-29 22:11

qq260091118 发表于 2020-4-27 11:17
调色盘控制颜色亮度和开关，按键点击一下就是跑马灯

为什么我添加那个你说的跑马灯按键，点击了没有用

carlbeven 发表于 2020-4-30 12:46

看这个视频，附网盘地址，代码已经更新！https://www.bilibili.com/video/BV1oZ4y1W7Ni

页: [1] 2

Arduino中文社区's Archiver

想做一个接入小爱的RGB氛围灯-求代码