求助！-Arduino中文社区 - Powered by Discuz! Archiver

13551049291 发表于 2020-3-3 16:33

求助！

#define BLINKER_WIFI
#define BLINKER_ALIGENIE_OUTLET //caiyq52-天猫精灵

#include <Blinker.h>

char auth[] = "b88c92efd33d"; //caiyq52-改成自己在点灯app中生成的key码
char ssid[] = "LHSL"; //caiyq52-改成自己的WIFI名称
char pswd[] = "Lhsl87653388";//caiyq52-改成自己的WIFI密码

BlinkerButton Button1("btn-abc"); //caiyq52-此组件未点灯app中自己设置的按键，改名"btn-abc"必须与自己APP中设定的名称一致
bool oState = false;
int Pin = 0; //caiyq52-定义控制引脚
void AliGeniePowerState(const String & state)
{
BLINKER_LOG("need set power state: ", state);

if (state == BLINKER_CMD_ON) { //caiyq52-天猫精灵控制开命令
   digitalWrite(Pin, HIGH);
   BlinkerAliGenie.powerState("on");

   BlinkerAliGenie.print();

   oState = true;
}
else if (state == BLINKER_CMD_OFF) { //caiyq52-天猫精灵控制关命令
   digitalWrite(Pin, LOW);
   BlinkerAliGenie.powerState("off");

   BlinkerAliGenie.print();

   oState = false;
}
}

void AliGenieQuery(int32_t queryCode)    //caiyq52-天猫精灵控制
{
BLINKER_LOG("AliGenie Query codes: ", queryCode);

switch (queryCode)
{
   case BLINKER_CMD_QUERY_ALL_NUMBER :
         BLINKER_LOG("AliGenie Query All");
         BlinkerAliGenie.powerState(oState ? "on" : "off");
         BlinkerAliGenie.print();
         break;
   case BLINKER_CMD_QUERY_POWERSTATE_NUMBER :
         BLINKER_LOG("AliGenie Query Power State");
         BlinkerAliGenie.powerState(oState ? "on" : "off");
         BlinkerAliGenie.print();
         break;
   default :
         BlinkerAliGenie.powerState(oState ? "on" : "off");
         BlinkerAliGenie.print();
         break;
}
}

void dataRead(const String & data)    // 如果未绑定的组件被触发，则会执行其中内容
{
BLINKER_LOG("Blinker readString: ", data);

Blinker.vibrate();

uint32_t BlinkerTime = millis();

Blinker.print("millis", BlinkerTime);
}

void button1_callback(const String & state) //点灯app内控制按键触发
{
BLINKER_LOG("get button state: ", state);
digitalWrite(Pin, !digitalRead(Pin));
}

void setup()
{
Serial.begin(115200);
BLINKER_DEBUG.stream(Serial);

pinMode(Pin, OUTPUT);          //定义io口为输出
digitalWrite(Pin, LOW);       //定义io默认电平

Blinker.begin(auth, ssid, pswd);
Blinker.attachData(dataRead);

BlinkerAliGenie.attachPowerState(AliGeniePowerState);
BlinkerAliGenie.attachQuery(AliGenieQuery);
Button1.attach(button1_callback);
}

void loop()
{
Blinker.run();
}

这段代码刷入成功后，点灯APP成功上线，但是按钮控制不了。按钮名称与代码一致。

Creeper666 发表于 2020-3-3 17:49

因为你用的不是开关按键

13551049291 发表于 2020-3-4 16:55

Creeper666 发表于 2020-3-3 17:49
因为你用的不是开关按键

是开关按键。不然怎么是bth呢

13551049291 发表于 2020-3-4 17:03

C:\Users\Administrator.USER-20190813UA\Desktop

奈何col 发表于 2020-3-4 17:29

你确定你灯是连在0上？？？

admin1314 发表于 2020-3-5 10:11

同样代码，为何你上得了线:dizzy:

页: [1]

Arduino中文社区's Archiver

求助！