首页 › M5Stack › 【搬运工】M5StickC手表应用分享

vany5921 发表于 2019-10-12 11:12

【搬运工】M5StickC手表应用分享

    项目地址 https://github.com/phillowcompiler/WatchInvader_M5StickC
    本项目基于M5StickC制作，内置一个打蜜蜂游戏，和基于NTP的时间显示。上传程序前需要更改watchinvader.h文件以下内容
#define SSIDNAME"your-ssid"
#define WIFIPASS"your-pass"

#define NTPSERVER "0.cn.pool.ntp.org"
#define TIMEZONE8
在第一次使用时需要按下B按键网络校准时间


再次按下B键回到主页面，A键进入游戏。
游戏通过感应手臂的运动或者按键进行射击，体感只支持MPU6886，否则无法移动。游戏中途是无法退出的。游戏胜利会显示60秒时间，按下B键返回主页（该项目偶尔娱乐一下，不适合日常使用）



具体代码如下：
#include <M5StickC.h>
#include <WiFi.h>
#include "time.h"
#include "watchinvaders.h"

RTC_TimeTypeDef RTC_TimeStruct;
RTC_DateTypeDef RTC_DateStruct;

// Prototype
void enterIntro();
void enterWatch();



// DISPLAY
void clearBuffer(){
memset((void *)sBuffer, 0, sizeof(sBuffer));
}

void setZeroBuffer(int x, int y, int w, int h){
byte *p;
byte c;
for(int yy = 0; yy < h; yy++){
    for(int xx = 0; xx < w; xx++){
      p = &sBuffer[((y + yy)*WIDTH + x + xx)/8];
      c = (1 << (x+xx)%8);
      if(*p & c){
      *p ^= c;
      }
    }
}
}

void drawBuffer(int x, int y, int w, int h, byte *in){
byte *p, *q;
byte c;
for(int yy = 0; yy < h; yy++){
    for(int xx = 0; xx < w; xx++){
      p = in + xx + yy/8 * w;
      c = ( *p & (1<<(yy%8)) ) ? 1 : 0;
      q = &sBuffer[((y + yy)*WIDTH + x + xx)/8];
      *q |= (c << (x+xx)%8);
    }
}
}

void dispBuffer(){
M5.Lcd.drawXBitmap(4, 4, sBuffer, WIDTH, HEIGHT, TFT_WHITE, BLACK);
}


// GAME
int chkRange(int in, int min, int max){
if( in < min ){return 0;}
if( in > max ){return 0;}
return -1;
}

void drawVaders(){
T_VADER *v;
for(int i = 0; i < sVaders.live; i++){
    v = &sVaders.mVader;
    if(v->sts != -1){
      drawBuffer(v->x, v->y, VADERW, VADERH, (byte *)&chrVader);
    }
}
}

void setVaders(){
T_VADER *v;
for(int i = 0; i < VADERSNUM; i++){
    v = &sVaders.mVader;
    v->sts = (i%2) ? 4:2;
    v->x = (i%VADERCOL)*(VADERW + VADERMARGIN);
    v->y = ((VADERRAW-1) - i/VADERCOL)*(VADERH + VADERMARGIN) + 8;
}
sVaders.live = VADERSNUM;
sVaders.dir = 1;
sVaders.current = 0;
sVaders.turn = 0;
sVaders.down = 0;
}

void destroyVader(){
static int count = 0;
T_VADER *v, *w;
if(++count < 3){return;}
count = 0;
for(int i = 0; i < sVaders.live; i++){
    v = &sVaders.mVader;
    if(v->sts < 9){continue;}
    if(++v->sts < 12){continue;}
    int d = i;
    while(d < sVaders.live - 1){
      v = &sVaders.mVader;
      w = &sVaders.mVader;
      v->sts = w->sts;
      v->x = w->x;
      v->y = w->y;
      d++;
    }
    if(--sVaders.live < 1){
      // GAME WIN
      sMain.mode = MODE_WATCH;
    }
    if(sVaders.current >= sVaders.live){
      sVaders.current = 0;
    }
}
}

void moveVaders(){
T_VADER *v;
v = &sVaders.mVader;
if(v->sts >= 0){
    v->x += sVaders.dir;
    if(v->x <= 0 || v->x >= (WIDTH-VADERW)){sVaders.turn = 1;}
    if(sVaders.down && v->y < HEIGHT-SHIPH-VADERH){v->y += 4;}
        if(v->sts < 9){
                v->sts ^= 1;
                if(v->y >= HEIGHT-SHIPH-VADERH){
      if(chkRange(v->x, sShip.x, sShip.x + SHIPW - 1) || chkRange(v->x + VADERW, sShip.x, sShip.x + SHIPW - 1)){
                          //deadShip();
          sMain.mode = MODE_LOSE;
                          return;
      }
                }
        }
}
if(++sVaders.current < sVaders.live){return;}
sVaders.down = 0;
if(sVaders.turn){
    sVaders.dir = -sVaders.dir;
    sVaders.turn = 0;
    sVaders.down = 1;
}
sVaders.current = 0;
}


void drawShip(){
drawBuffer(sShip.x, HEIGHT-SHIPH, SHIPW, SHIPH, (byte *)chrShip);
}

void moveShip(){
float pitch, roll, yaw;
M5.Mpu6886.getAhrsData(&pitch, &roll, &yaw);
float dx = 12 * sin(roll/180);
if(sShip.realx + dx < 0){
      sShip.realx = 0;
}
else if(sShip.realx + dx > (WIDTH-SHIPW)){
      sShip.realx = WIDTH-SHIPW;
}
else{
      sShip.realx += dx;
}
sShip.x = sShip.realx;
}

void launchShoot(){
if(sShip.shootx >= 0){return;}
float accX,accY,accZ;
M5.Mpu6886.getAccelData(&accX,&accY,&accZ);
//M5.Lcd.setCursor(0, 45);
//M5.Lcd.printf("%.2f   %.2f   %.2f      ",accX * 1000,accY * 1000, accZ * 1000);
if(accX*1000 >= 1200 || digitalRead(M5_BUTTON_HOME) == LOW){
    //M5.Lcd.fillScreen(RED);
    //delay(500);
    sShip.shootx = sShip.x + (SHIPW/2);
    sShip.shooty = HEIGHT - SHIPH - 4;
}
}


void chkShoot(){
if(sShip.shootx < 0){return;}
T_VADER *v;
for( int i = 0; i < VADERSNUM; i++ ){
    v = &sVaders.mVader;
    if(v->sts < 0 || v->sts > 8){continue;}
    if(chkRange(sShip.shootx, v->x, v->x + VADERW) && chkRange(sShip.shooty, v->y, v->y + VADERH)){
      v->sts = 9;
      sShip.shootx = -1;
    }
}
}

const byte chrShoot [] PROGMEM ={0x0f,};
void drawShoot(){
//M5.Lcd.setCursor(0, 45);
//M5.Lcd.printf("shootx=%d",sShip.shootx);
if(sShip.shootx < 0){return;}
sShip.shooty -= 1;
if(sShip.shooty < 0){sShip.shootx = -1;}
drawBuffer(sShip.shootx, sShip.shooty, 1, 4, (byte *)chrShoot);
}

void initShip(){
sShip.x = (WIDTH - SHIPW)/2;
sShip.realx = (float)sShip.x;
sShip.shootx = -1;
}

// Move mode
void enterIntro(){
M5.Lcd.fillScreen(TFT_BLACK);
M5.Lcd.setTextSize(1);
M5.Lcd.drawCentreString("WATCH INVADERS",80,15,2);
M5.Lcd.drawCentreString("PUSH START TO BEAT!",80,50,1);
M5.Lcd.drawCentreString("PUSH ADJUST BY NTP ",80,60,1);
//M5.Lcd.setCursor(30,50);
//M5.Lcd.println("PUSH START TO BEAT!");
//M5.Lcd.setCursor(30,60);
//M5.Lcd.println("PUSH NTP ADJUST");
//clearBuffer();
//M5.Lcd.drawXBitmap(16, 14, intro, 128, 55, TFT_WHITE, BLACK);
sMain.entrtime = millis();
sMain.release = 0;
sMain.mode = MODE_INTRO;
}

void enterGame(){
M5.Lcd.fillScreen(TFT_BLACK);
setVaders();
initShip();

while(1){
    if(digitalRead(M5_BUTTON_HOME) ==HIGH && digitalRead(M5_BUTTON_RST) == HIGH){break;}
    delay(10);
}
sMain.mode = MODE_GAME;
}

// TIME ADJUST
void getNTP(){
const char* ssid       = SSIDNAME;
const char* password   = WIFIPASS;
int count = 0;
M5.Lcd.fillScreen(BLACK);
M5.Lcd.setCursor(0,4);
M5.Lcd.setTextSize(1);
M5.Lcd.println(" Adjust by NTP");
M5.Lcd.println(" Wifi Conecting...");

#ifdef SMARTCONFIG
WiFi.begin();
#else
WiFi.begin(ssid, password);
#endif

while (WiFi.status() != WL_CONNECTED) {
      delay(500);
      if(++count > 60){
      M5.Lcd.println("No Wifi");
      delay(1000);
      enterIntro();
      return;   
      }
}
M5.Lcd.println(" CONNECTED!");

//init and get the time
configTime(TIMEZONE * 3600L, 0, "ntp.nict.jp", "time.google.com", "ntp.jst.mfeed.ad.jp");
struct tm timeInfo;
if (getLocalTime(&timeInfo)) {
    // Set RTC time
    RTC_TimeTypeDef TimeStruct;
    TimeStruct.Hours   = timeInfo.tm_hour;
    TimeStruct.Minutes = timeInfo.tm_min;
    TimeStruct.Seconds = timeInfo.tm_sec;
    M5.Rtc.SetTime(&TimeStruct);

    RTC_DateTypeDef DateStruct;
    DateStruct.WeekDay = timeInfo.tm_wday;
    DateStruct.Month = timeInfo.tm_mon + 1;
    DateStruct.Date = timeInfo.tm_mday;
    DateStruct.Year = timeInfo.tm_year + 1900;
    M5.Rtc.SetData(&DateStruct);
}

//disconnect WiFi as it's no longer needed
WiFi.disconnect(true);
WiFi.mode(WIFI_OFF);
delay(2000);
enterIntro();
}

void enterWatch(){
M5.Lcd.fillScreen(BLACK);
M5.Lcd.setTextSize(1);
M5.Lcd.drawCentreString("U Get the Time!",80,15,2);
M5.Lcd.drawCentreString("PUSH BACK TO TOP ",80,60,1);
sMain.entrtime = millis();
sMain.release = 0;
sMain.mode = MODE_WATCH;
}

void deadShip(){
for(int i = 9; i < 12; i++){
    setZeroBuffer(sShip.x, HEIGHT-SHIPH, SHIPW, SHIPH);
    drawBuffer(sShip.x, HEIGHT-SHIPH, SHIPW, SHIPH, (byte *)&chrVader);
    dispBuffer();
    delay(300);
}
M5.Lcd.fillScreen(TFT_BLACK);
M5.Lcd.setTextSize(1);
M5.Lcd.drawCentreString("U MISS THE TIME...",80,30,2);
//M5.Lcd.setCursor(20,45);
//M5.Lcd.println("PRESS:");
//M5.Lcd.setCursor(30,60);
M5.Lcd.drawCentreString("PUSH BACK TO TOP ",80,60,1);
sMain.entrtime = millis();
sMain.release = 0;
}


void chkTimeOut(){
ulong time = millis();
if(time - sMain.entrtime > 1000*60 || time < sMain.entrtime){
    switch(sMain.mode){
      case MODE_INTRO:
      M5.Axp.ScreenBreath(0);
      esp_light_sleep_start();
      sMain.release = 0;
      M5.Axp.ScreenBreath(8);
      sMain.entrtime = millis();
      break;    // Sleep
      case MODE_WATCH:enterIntro();break;
      case MODE_LOSE:enterIntro();break;
    }
}
}

void modeIntro(){
chkTimeOut();
if(!sMain.release){
        if(digitalRead(M5_BUTTON_HOME) ==HIGH && digitalRead(M5_BUTTON_RST) == HIGH){sMain.release = 1;}
        return;
}
if(digitalRead(M5_BUTTON_HOME) == LOW){
    enterGame();
}//enterGame();}
if(digitalRead(M5_BUTTON_RST) == LOW){getNTP();}
}

void modeGame(){
moveShip();
launchShoot();
chkShoot();
moveVaders();
destroyVader();

clearBuffer();
drawVaders();
drawShip();
drawShoot();
dispBuffer();

/* Mode Chnage? */
switch(sMain.mode){
    case MODE_WATCH:enterWatch();break;
    case MODE_LOSE:deadShip();break;
}
}

void modeWatch(){
chkTimeOut();
if(!sMain.release){
        if(digitalRead(M5_BUTTON_HOME) ==HIGH && digitalRead(M5_BUTTON_RST) == HIGH){sMain.release = 1;}
        return;
}
M5.Rtc.GetTime(&RTC_TimeStruct);
M5.Lcd.setCursor(35,35);
M5.Lcd.setTextSize(2);
M5.Lcd.printf("%02d:%02d:%02d\n",RTC_TimeStruct.Hours, RTC_TimeStruct.Minutes, RTC_TimeStruct.Seconds);
if(digitalRead(M5_BUTTON_RST) == LOW){enterIntro();}
}

void modeLose(){
chkTimeOut();
if(!sMain.release){
        if(digitalRead(M5_BUTTON_HOME) ==HIGH && digitalRead(M5_BUTTON_RST) == HIGH){sMain.release = 1;}
        return;
}
if(digitalRead(M5_BUTTON_RST) == LOW){enterIntro();}
}

//
//Arduino function
//
void setup() {
// put your setup code here, to run once:
M5.begin();
M5.Axp.ScreenBreath(8);
M5.Mpu6886.Init();
M5.Lcd.setRotation(1);
M5.Lcd.fillScreen(BLACK);

M5.Lcd.setTextSize(1);
//M5.Lcd.setCursor(40, 0, 2);
//M5.Lcd.println("RTC TEST");
/***
RTC_TimeTypeDef TimeStruct;
TimeStruct.Hours   = 18;
TimeStruct.Minutes = 56;
TimeStruct.Seconds = 10;
M5.Rtc.SetTime(&TimeStruct);
RTC_DateTypeDef DateStruct;
DateStruct.WeekDay = 3;
DateStruct.Month = 3;
DateStruct.Date = 22;
DateStruct.Year = 2019;
M5.Rtc.SetData(&DateStruct);
***/
pinMode(M5_BUTTON_HOME, INPUT);
pinMode(M5_BUTTON_RST, INPUT);

gpio_wakeup_enable(GPIO_NUM_37, GPIO_INTR_LOW_LEVEL);
gpio_wakeup_enable(GPIO_NUM_39, GPIO_INTR_LOW_LEVEL);

// GPIOをウェイクアップソースとして有効にする
esp_sleep_enable_gpio_wakeup();

enterIntro();
}


void loop() {
switch(sMain.mode){
case MODE_INTRO:modeIntro();break;
case MODE_GAME:modeGame();break;
case MODE_WATCH:modeWatch();break;
case MODE_LOSE:modeLose();break;
}
delay(10);
}

laai 发表于 2020-1-17 21:08

谢谢分享！~很棒

genvex 发表于 2020-4-10 14:49

laai 发表于 2020-1-17 21:08
谢谢分享！~很棒

大爷，库文件呢？

查看完整版本: 【搬运工】M5StickC手表应用分享