esp8266 wifi接入app显示设备离线，手机开热点就可以上线
遇到个非常奇怪的问题，一个最简单的上线程序，开手机热点就可以上线，连WIFI 2.4G就是上不了线。开始以为是路由器的问题，找了个以前的路由器试了一次，还是上不了线，不知道是什么情况，宽带是联通的。\ \_\ \_\ \____\\ \_\
\/___/ \/__/ \/_/\/_/\/_/\/_/\/_/\/____/ \/_/
To better use blinker with your IoT project!
Download latest blinker library here!
=> https://github.com/blinker-iot/blinker-library
Connecting to eff
ESP8266_MQTT initialized...
===========================================================
================== Blinker Timer loaded! ==================
EEPROM address 1536-2431 is used for Blinker Timer!
========= PLEASE AVOID USING THESE EEPROM ADDRESS! ========
===========================================================
WiFi Connected.
IP Address:
xxx.xxx.xxx.xxx
GET... failed, error: connection failed
ERROR: Maybe you have put in the wrong AuthKey!
ERROR: Or maybe your request is too frequently!
ERROR: Or maybe your network is disconnected!
GET... failed, error: connection failed
ERROR: Maybe you have put in the wrong AuthKey!
#define BLINKER_WIFI
#include <Blinker.h>
char auth[] = "XXXXXXXXX";//替代为你的密匙
char ssid[] = "eff"; //2.4Gwifi名称，可以是手机热点，不要有中文
char pswd[] = "12345678";//WiFi密码
byte LED =14;
// 新建组件对象
BlinkerButton Button1("btn-g7m");//ON
BlinkerButton Button2("btn-i7m");//OFF
// 按下按键即会执行该函数
void button1_callback(const String & state) { //回调函数
BLINKER_LOG("get button state: ", state);
digitalWrite(LED,HIGH);
//Blinker.vibrate();
}
void button2_callback(const String & state) { //回调函数
BLINKER_LOG("get button state: ", state);
digitalWrite(LED,LOW);
//Blinker.vibrate();
}
void setup() {
// 初始化串口，并开启调试信息，项目成型后可关闭
Serial.begin(115200);
BLINKER_DEBUG.stream(Serial);
// 初始化有LED的IO
pinMode(LED, OUTPUT);
digitalWrite(LED, HIGH);
// 初始化blinker
Blinker.begin(auth, ssid, pswd);
Button1.attach(button1_callback);//绑定回调函数
Button2.attach(button2_callback);
}
void loop() {
Blinker.run(); GET... failed, error: connection failed
连不上网，自己检查网络吧 如果是宽带问题那就简单了，主要是宽带正常，WIFI正常，从路由器后台能看到ESP模块已经连上了 djdyaqb 发表于 2022-9-24 13:47
如果是宽带问题那就简单了，主要是宽带正常，WIFI正常，从路由器后台能看到ESP模块已经连上了 ...
连上了路由器，不等于连上了互联网。这个报错就是说没连上互联网，或者是DNS等原因造成的网络不通。这个不是blinker这边的问题，只有你自己排查了。 Download latest blinker library here!
=> https://github.com/blinker-iot/blinker-library
Connecting to fei
ESP8266_MQTT initialized...
===========================================================
================== Blinker Timer loaded! ==================
EEPROM address 1536-2431 is used for Blinker Timer!
========= PLEASE AVOID USING THESE EEPROM ADDRESS! ========
===========================================================
WiFi Connected.
IP Address:
192.168.1.171
Freeheap: 36456
mDNS responder started
webSocket_MQTT server started
ws://438752FD9VK8QQRUTQ4JL965.local:81
这个应该是连上互联网了吧？还是不上线，但是把wifi关了，开同样名称的手机热点能上线，实在是找不到原因了:dizzy:
页:
[1]