如何实现继电器控制开启后延时1S自动关闭

houxuantao · 发表于 2022-3-3 11:56

#define BLINKER_WIFI
#define BLINKER_MIOT_LIGHT
#include <Blinker.h>

char auth[] = "aaaaaa";
char ssid[] = "aaaaa";
char pswd[] = "aaaaaa";

// 新建组件对象
BlinkerButton Button1("btn-abc");
BlinkerNumber Number1("num-abc");

int counter = 0;

//小爱同学控制电源开关的函数
void miotPowerState(const String & state)
{
BLINKER_LOG("need set power state: ", state);

if (state == BLINKER_CMD_ON) {
      digitalWrite(LED_BUILTIN, LOW);
      digitalWrite(0, LOW);

      BlinkerMIOT.powerState("on");
      BlinkerMIOT.print();
}
else if (state == BLINKER_CMD_OFF) {
      digitalWrite(LED_BUILTIN, HIGH);
      digitalWrite(0, HIGH);

      BlinkerMIOT.powerState("off");
      BlinkerMIOT.print();
}
}
void miotQuery(int32_t queryCode)
{
BLINKER_LOG("MIOT Query codes: ", queryCode);

switch (queryCode)
{
      case BLINKER_CMD_QUERY_PM25_NUMBER :
         BLINKER_LOG("MIOT Query PM25");
         BlinkerMIOT.pm25(20);
         BlinkerMIOT.print();
         break;
      case BLINKER_CMD_QUERY_HUMI_NUMBER :
         BLINKER_LOG("MIOT Query HUMI");
         BlinkerMIOT.humi(20);
         BlinkerMIOT.print();
         break;
      case BLINKER_CMD_QUERY_TEMP_NUMBER :
         BLINKER_LOG("MIOT Query TEMP");
         BlinkerMIOT.temp(20);
         BlinkerMIOT.print();
         break;
      case BLINKER_CMD_QUERY_TIME_NUMBER :
         BLINKER_LOG("MIOT Query Time");
//          BlinkerMIOT.time(millis());
         BlinkerMIOT.print();
         break;
      default :
         BlinkerMIOT.temp(20);
         BlinkerMIOT.humi(20);
         BlinkerMIOT.pm25(20);
         BlinkerMIOT.co2(20);
         BlinkerMIOT.print();
         break;
}
}

// 按下按键即会执行该函数
void button1_callback(const String & state)
{
BLINKER_LOG("get button state: ", state);
digitalWrite(LED_BUILTIN, !digitalRead(LED_BUILTIN));
//控制继电器
digitalWrite(0, !digitalRead(0));
}

// 如果未绑定的组件被触发，则会执行其中内容
void dataRead(const String & data)
{
BLINKER_LOG("Blinker readString: ", data);
counter++;
Number1.print(counter);
}

void setup()
{
// 初始化串口
Serial.begin(115200);
BLINKER_DEBUG.stream(Serial);

// 初始化有LED的IO
pinMode(LED_BUILTIN, OUTPUT);
digitalWrite(LED_BUILTIN, HIGH);

//控制继电器
pinMode(0, OUTPUT);
digitalWrite(0, HIGH);

// 初始化blinker
Blinker.begin(auth, ssid, pswd);
Blinker.attachData(dataRead);

Button1.attach(button1_callback);
//小爱同学电源回调函数
BlinkerMIOT.attachPowerState(miotPowerState);
BlinkerMIOT.attachQuery(miotQuery);
}

void loop() {
Blinker.run();
}

现在可以控制继电器，想要实现继电器控制开启后延时1S自动关闭，劳烦大神讲解支持

a360267944 · 发表于 2022-4-4 23:26

#define BLINKER_WIFI
#define BLINKER_MIOT_OUTLET
#define BLINKER_ALIGENIE_OUTLET
#define BLINKER_DUEROS_OUTLET
#include <Blinker.h>

char auth[] = "3";  //设备key
char ssid[] = "1";  //路由器wifi ssid
char pswd[] = "2";  //路由器wifi 密码
BlinkerButton Button1("anniu");    //按钮键名

bool oState = false;

void button1_callback(const String & state)
{
BLINKER_LOG("get button state: ", state);
digitalWrite(0,LOW);
Blinker.delay(200);
digitalWrite(0, HIGH);
}
void miotPowerState(const String & state)
{
BLINKER_LOG("need set power state: ", state);

if (state == BLINKER_CMD_ON) {
      digitalWrite(0, LOW);
      Blinker.delay(200);
      digitalWrite(0, HIGH);
      BlinkerMIOT.powerState("on");
      BlinkerMIOT.print();

      oState = true;
}
else if (state == BLINKER_CMD_OFF) {
      digitalWrite(0,LOW);
      Blinker.delay(200);
      digitalWrite(0, HIGH);
      BlinkerMIOT.powerState("off");
      BlinkerMIOT.print();

      oState = false;
}
}
void aligeniePowerState(const String & state)
{
BLINKER_LOG("need set power state: ", state);

if (state == BLINKER_CMD_ON) {
      digitalWrite(0, LOW);
      Blinker.delay(200);
      digitalWrite(0, HIGH);
      BlinkerAliGenie.powerState("on");
      BlinkerAliGenie.print();

}
else if (state == BLINKER_CMD_OFF) {
      digitalWrite(0,LOW);
      Blinker.delay(200);
      digitalWrite(0, HIGH);
      BlinkerAliGenie.powerState("off");
      BlinkerAliGenie.print();
      oState = false;
}
}

void duerPowerState(const String & state)
{
BLINKER_LOG("need set power state: ", state);

if (state == BLINKER_CMD_ON) {
      digitalWrite(0, LOW);
      Blinker.delay(200);
      digitalWrite(0, HIGH);
      BlinkerDuerOS.powerState("on");
      BlinkerDuerOS.print();

}
else if (state == BLINKER_CMD_OFF) {
      digitalWrite(0,LOW);
      Blinker.delay(200);
      digitalWrite(0, HIGH);
      BlinkerDuerOS.powerState("off");
      BlinkerDuerOS.print();
      oState = false;
}
}
void setup()
{
Serial.begin(115200);
BLINKER_DEBUG.stream(Serial);

pinMode(0, OUTPUT);
digitalWrite(0, HIGH);

   Blinker.begin(auth,ssid, pswd);
BlinkerDuerOS.attachPowerState(duerPowerState);
BlinkerMIOT.attachPowerState(miotPowerState);
BlinkerAliGenie.attachPowerState(aligeniePowerState);
Button1.attach(button1_callback);
}

void loop()
{
Blinker.run();
}

jerryiot · 发表于 2022-3-3 16:11

//控制继电器
digitalWrite(0, !digitalRead(0));
Blinker.delay(1000);
digitalWrite(0, !digitalRead(0));

复制代码

初识人间世 · 发表于 2022-3-11 13:52

void loop() {
Blinker.run();
pinState = digitalRead(0);
if (pinState == HIGH)
{
delay(1000);
digitalWrite(0, LOW);
}
}

复制代码

和楼上差不多。
我看你这个要求，是不是也是做的远程开机啊，和我想法一样，继电器闭合1S再松开，就开机了。

wdrvk · 发表于 2022-3-12 16:36

你这个按键不消抖的吗，这样会按很多次吧

houxuantao · 发表于 2022-3-16 15:53

初识人间世发表于 2022-3-11 13:52
和楼上差不多。
我看你这个要求，是不是也是做的远程开机啊，和我想法一样，继电器闭合1S再松开，就开机 ...

我是控制的车库门，里面有个按键盒，遥控没了。做个这个使用，连接家里无线就可以用了。

		自动登录	找回密码
密码			立即注册

[求助] 如何实现继电器控制开启后延时1S自动关闭