首页 › 点灯·blinker › 小爱同学控制8266没反应

Piopid 发表于 2020-12-22 01:37

小爱同学控制8266没反应

小爱同学控制不了，但是blinker正常，代码是blinker官方的例子，中介是阿里云，米家也能正常同步,用的8266 01s的板，但在NodeMcu上也没有反应，完整代码是这样的
#define BLINKER_WIFI
#define BLINKER_MIOT_OUTLET

#include <Blinker.h>

char auth[] = "89e6364771fc";
char ssid[] = "Piopid";
char pswd[] = "";
BlinkerButton Button1("btn-on");
BlinkerButton Button2("btn-off");
bool oState = false;

void miotPowerState(const String & state)
{
    BLINKER_LOG("need set power state: ", state);

    if (state == BLINKER_CMD_ON) {
      digitalWrite(LED_BUILTIN, HIGH);

      BlinkerMIOT.powerState("on");
      BlinkerMIOT.print();

      oState = true;
    }
    else if (state == BLINKER_CMD_OFF) {
      digitalWrite(LED_BUILTIN, LOW);

      BlinkerMIOT.powerState("off");
      BlinkerMIOT.print();

      oState = false;
    }
}

void miotQuery(int32_t queryCode)
{
    BLINKER_LOG("MIOT Query codes: ", queryCode);

    switch (queryCode)
    {
      case BLINKER_CMD_QUERY_ALL_NUMBER :
            BLINKER_LOG("MIOT Query All");
            BlinkerMIOT.powerState(oState ? "on" : "off");
            BlinkerMIOT.print();
            break;
      case BLINKER_CMD_QUERY_POWERSTATE_NUMBER :
            BLINKER_LOG("MIOT Query Power State");
            BlinkerMIOT.powerState(oState ? "on" : "off");
            BlinkerMIOT.print();
            break;
      default :
            BlinkerMIOT.powerState(oState ? "on" : "off");
            BlinkerMIOT.print();
            break;
    }
}

void dataRead(const String & data)
{
    BLINKER_LOG("Blinker readString: ", data);

    Blinker.vibrate();
   
    uint32_t BlinkerTime = millis();
   
    Blinker.print("millis", BlinkerTime);
}

void button1_callback(const String & state)   //点灯app内控制按键触发
{
   
    digitalWrite(LED_BUILTIN,LOW);
    BLINKER_LOG("get button state:on", state);
}
void button2_callback(const String & state)   //点灯按键触发
{
   
    digitalWrite(LED_BUILTIN,HIGH);
    BLINKER_LOG("get button state:off", state);
}

void button3_callback(const String & state)   //点灯按键触发
{

    BLINKER_LOG("get button state:on", state);
   Blinker.print(state);
    if(state=="on"){
    digitalWrite(LED_BUILTIN,LOW);
   }else if(state =="off"){
            digitalWrite(LED_BUILTIN,HIGH);
      
    }
}


void setup()
{
    Serial.begin(9600);
    BLINKER_DEBUG.stream(Serial);

    pinMode(LED_BUILTIN, OUTPUT);
    digitalWrite(LED_BUILTIN, LOW);

    Blinker.begin(auth, ssid, pswd);
    Blinker.attachData(dataRead);
   
    BlinkerMIOT.attachPowerState(miotPowerState);
    BlinkerMIOT.attachQuery(miotQuery);
    Button1.attach(button1_callback);
    Button2.attach(button2_callback);
}

void loop()
{
    Blinker.run();
}串口监视器是这样的
Freeheap: 10216
mDNS responder started
webSocket_MQTT server started
ws://03BBF092WPHZRC1BMVS2SN0F.local:81
0⸮~?⸮4⸮Ҷ⸮⸮OAqE⸮

__       __                __
/\ \   /\ \    __      /\ \            v0.3.4
\ \ \___ \ \ \/\_\    ___\ \ \/'\      __   _ __   
\ \ '__`\\ \ \ \/\ \ /' _ `\ \ , <    /'__`\/\`'__\
\ \ \L\ \\ \ \_\ \ \/\ \/\ \ \ \\`\ /\__/\ \ \./
   \ \_,__/ \ \__\\ \_\ \_\ \_\ \_\ \_\ \____\\ \_\
    \/___/   \/__/ \/_/\/_/\/_/\/_/\/_/\/____/ \/_/
    To better use blinker with your IoT project!
    Download latest blinker library here!
    => https://github.com/blinker-iot/blinker-library

Connecting to Piopid
ESP8266_MQTT initialized...

===========================================================
================== Blinker Timer loaded! ==================
Warning!EEPROM address 1536-2431 is used for Blinker Timer!
============= DON'T USE THESE EEPROM ADDRESS! =============
===========================================================

WiFi Connected.
IP Address:
192.168.43.216
Freeheap: 10216
mDNS responder started
webSocket_MQTT server started
ws://03BBF092WPHZRC1BMVS2SN0F.local:81
Connecting to MQTT...
MQTT Connected!
Freeheap: 10368
=======================================================
=========== Blinker Auto Control mode init! ===========
Warning!EEPROM address 0-1279 is used for Auto Control!
=========== DON'T USE THESE EEPROM ADDRESS! ===========
=======================================================
get button state:ontap
get button state:offtap
get button state:ontap
get button state:ontap
get button state:offtap
get button state:ontap
get button state:offtap
MQTT Ping!
MQTT Ping!
MQTT Ping!
MQTT Ping!
get button state:ontap
MQTT Ping!
MQTT Ping!
MQTT Ping!
MQTT Ping!
MQTT Ping!
MQTT Ping!
MQTT Ping!
MQTT Ping!
MQTT Ping!

jianhua727 发表于 2020-12-22 08:39

Blinker语音设置有没有问题，设置不对小爱会提示设备异常

jianhua727 发表于 2020-12-22 08:42

程序也不用那么复杂，单键控制，状态反馈给小爱

VIfun 发表于 2021-1-11 21:30

找到原因了吗

查看完整版本: 小爱同学控制8266没反应